Problem with tuner pro

littleblackpsycho

Donating Member
I just tried to hook tuner pro back up in the truck but now what ever bin be it stock or ultimate any other i get knock like crazy just idling and is un drivable, take tuner pro off and put stock memcal in 2-3 degrees retard on full pull and drives perfect switch it back and the knock counter goes crazy and if you touch the gas it goes to max retard. Is it my ostrich?
Any help is appreciated.
 

Tooky

Serious about performance
Re: Problem with tuner pro

I'm confused by your interchangeable usage of tuner pro and the Ostrich. One is software and the other is hardware.

You said the stock memcal runs best. Are you matching your MAP sensor to the chip you're running (3 bar?) Are you sure you got the Moates adapter inserted correctly and not backwards? That's where I'd start.
 

littleblackpsycho

Donating Member
Re: Problem with tuner pro

for stock chip I have aybn I tried to run that same bin in tuner pro load it into the ostrich and it starts to get massive knock retard. Switch to ultimate and swap map sensor for 3 bar and nothing changes still knocks the same even at idle. One thing weird though is once and a while when I compare bins or sometimes open them with tuner pro they are way screwed up like the tables will be in the negatives or all zeros. I tried to flip the adapter around and truck won't start like that so I assume it is in correctly.
 

fivetodrive

CRISPY
Re: Problem with tuner pro

Did the video help? It is lots of little things that seem to go together to get it working perfect. If so give me a vote or two!
 

nallj92

Active member
Re: Problem with tuner pro

i just moved to eau claire, if you need any other help let me know,

justin
 

nallj92

Active member
Re: Problem with tuner pro

hows the turbo treating you? yeah been here about 2 months, living off eddy ln and 53, i have the white grey here now, the black one is broken again
 

littleblackpsycho

Donating Member
Re: Problem with tuner pro

haven't got over stock boost on the turbo turned the truck back to stock to figure out some ignition problems and false knock after sitting for two years. I wish I would of known you were here we just had a carshow last weekend in wissota. So you all finished with school?
 
Top