Project 663 Begins

SYO237

SYO237

SyTy Registry
Re: Project 663 Begins

Typical phone conversation I have with Marty on a regular basis. It starts out:

A: Hey Marty... whats up?
M: Not much... driving the GT.


With the pics above... I can see why I usually talk to Marty in the SGT... its purty. :tup:
 
Syborg Twin Turbo

Syborg Twin Turbo

Syborg Twin Turbo
Re: Project 663 Begins

You can get a complete LS1 rear disc setup thats a direct bolt on for 200 or less on ebay
Click to expand...

- Got a link

then get the bolt on ebrake cable kit from the GP here on the board
Click to expand...

see the thread - but i really hate e-brakes

front calipers and rotors for 150 or less on ebay and then get ahold of ebmiller88 on s-seriesforum.com as he sells the hubs and brackets needed for the 2wd trucks for around 250 or less i believe and your set,
Click to expand...

Still have the same problem that i don't like - his kit changes the offset fo the front wheels. Move them out 5/8 of an inch. Not acceptable in my eye's

I've thought about buying a complete disc brake rear end with a posi - may be the best way to convert the rear.

Really i would like a set of Aluminum drums for the rear
 
Syborg Twin Turbo

Syborg Twin Turbo

Syborg Twin Turbo
Re: Project 663 Begins

midnightbluS10 said:
Anything new with 663?
Click to expand...

actually i am buying a cowl induction hood and i plan to paint the top of the truck to see how it looks. Something very similar to the rendering for the syborg project.
 
JSM

JSM

Active member
Re: Project 663 Begins

Damnit Marty, time to change my underwear again.... GRRRR
 
ShuggsRR

ShuggsRR

Donating Member
Re: Project 663 Begins

Syborg Twin Turbo said:
nope - sold it
Click to expand...

man that truck was BEAUTIFUL... you better have gotten good loot for it.

Sissy, bet you were scared of the CPI 4.3 power!
 
jjorgensen52

jjorgensen52

NHSTE - I'm the only one!
Re: Project 663 Begins

ShuggsRR said:
man that truck was BEAUTIFUL... you better have gotten good loot for it.

Sissy, bet you were scared of the CPI 4.3 power!
Click to expand...
I like my 4.3 CPI power... just need to get the one manifold to fit the vortec heads dangit :lol:

I have the FrankenGT
 
ShuggsRR

ShuggsRR

Donating Member
Re: Project 663 Begins

Who needs a Sonoma GT to get that? I have a 94 4dr 4x4 Jimmy that has a CPI 4.3 with the black intake! WEEEEEEEEEE
 
You must log in or register to reply here.
Top