Injected1
Member
Alright guys I am posting these trucks and if no one is interested they will both be going on Ebay with all parts included.
Unfortunately I won't be able to finish them due to my best friend/mechanic/fabricator getting locked up on a bogus charge and he can't afford an attorney so I am selling all this to get him one. The attorney wants $7500 for the case and I know that I won't get that, but I'd like to get close.
1st truck- 1991 GMC Syclone rolling chassis on a good set of factory wheels and rear disc brakes. The frame off restoration was started and just needs to be completed. I blasted and Chassis Savered the frame and then still wasn't happy with it so I Polyurethaned the entire frame red and installed new Poly mounts. The truck has about 64k on it and is in pretty decent shape. It will need some going over the previous body work and paint. It has a little bit of rust on the drivers bed side but the new patch panels are included. The COMPLETE interior is in excellent condition minus the radio I believe. The fuel system is complete and like new with Walbro 255 I am pretty sure.
2nd truck- 1993 GMC Typhoon rolling chassis with a totally gutted interior. The entire fuel system is still there and complete. Front and rear axle and complete and in great shape, with factory wheels painted black. The entire truck has been sanded and primed and I believe the front left fender will need replacing due to a large dent, and the rear will need some body work. No driver, passenger, or rear gate glass. A good candidate for a race/ pro street build.
I believe that with all the parts I have someone with the know how could assemble the Syclone and have very nice running turbo 4.3v6. The other truck will need interior and about some parts if you build the sy first.
Cladding- None of it is installed but I have 18 pieces that will come with the truck Most are in decent shape others will need some repairs. I am no 100% sure but I think you will nedd about 3 pieces to complete the SY.
Engines- 2 ---4.3 v6 with about 70k each on them. One was damaged from overboost (flat spotted crank) with a 20g and is complete the other was just removed because of engine sludge and a slightly bent valve (longblock). I have an extra set of heads that were machined and refurbished like new (never used) on the block before I did a vortec swap on my truck
Transmission- 1 in good shape needs governor installed included w/ b&m calibration kit
2 transfer cases 1 great 1 great with small leak. 2 drive shafts 1 propshaft
http://s244.photobucket.com/albums/gg17/syclone6969/SY TY Pics/
I would like to let everyone know that this is alot of the parts but I am sure that I left some out. I can't even begin to explain how much is included.
If you have any questions please let me know as I need to help my friend out badly. Shipping should be easily done with a 2 car hauler as everything should fit in the 2 trucks.
Jeff "itsturbo" has first dibs but please get in line.
Unfortunately I won't be able to finish them due to my best friend/mechanic/fabricator getting locked up on a bogus charge and he can't afford an attorney so I am selling all this to get him one. The attorney wants $7500 for the case and I know that I won't get that, but I'd like to get close.
1st truck- 1991 GMC Syclone rolling chassis on a good set of factory wheels and rear disc brakes. The frame off restoration was started and just needs to be completed. I blasted and Chassis Savered the frame and then still wasn't happy with it so I Polyurethaned the entire frame red and installed new Poly mounts. The truck has about 64k on it and is in pretty decent shape. It will need some going over the previous body work and paint. It has a little bit of rust on the drivers bed side but the new patch panels are included. The COMPLETE interior is in excellent condition minus the radio I believe. The fuel system is complete and like new with Walbro 255 I am pretty sure.
2nd truck- 1993 GMC Typhoon rolling chassis with a totally gutted interior. The entire fuel system is still there and complete. Front and rear axle and complete and in great shape, with factory wheels painted black. The entire truck has been sanded and primed and I believe the front left fender will need replacing due to a large dent, and the rear will need some body work. No driver, passenger, or rear gate glass. A good candidate for a race/ pro street build.
I believe that with all the parts I have someone with the know how could assemble the Syclone and have very nice running turbo 4.3v6. The other truck will need interior and about some parts if you build the sy first.
Cladding- None of it is installed but I have 18 pieces that will come with the truck Most are in decent shape others will need some repairs. I am no 100% sure but I think you will nedd about 3 pieces to complete the SY.
Engines- 2 ---4.3 v6 with about 70k each on them. One was damaged from overboost (flat spotted crank) with a 20g and is complete the other was just removed because of engine sludge and a slightly bent valve (longblock). I have an extra set of heads that were machined and refurbished like new (never used) on the block before I did a vortec swap on my truck
Transmission- 1 in good shape needs governor installed included w/ b&m calibration kit
2 transfer cases 1 great 1 great with small leak. 2 drive shafts 1 propshaft
http://s244.photobucket.com/albums/gg17/syclone6969/SY TY Pics/
I would like to let everyone know that this is alot of the parts but I am sure that I left some out. I can't even begin to explain how much is included.
If you have any questions please let me know as I need to help my friend out badly. Shipping should be easily done with a 2 car hauler as everything should fit in the 2 trucks.
Jeff "itsturbo" has first dibs but please get in line.
