Rpm stage 1 turbo

[cdprayor]

Just got this typhoon and it is suppose to have a rpm stage 1 turbo. Is there any way to adjust the boost? Right now it max's out at 15psi.

 

[sytyguy]

Re: Rpm stage 1 turbo

What boost controller are you using? If none, then there's your problem.

 

[cdprayor]

Re: Rpm stage 1 turbo

What boost controller are you using? If none, then there's your problem.

I don't believe there is any boost controller on it. Any suggestions on a good one?

 

[sytyguy]

Re: Rpm stage 1 turbo

That's a loaded question. What's the budget? What's the demands for a boost controller?

You could "get by" with a $15 eBay mechanical bleeder screw, but you might prefer a $500+ Greddy Profec OLED.

 

[SY2455]

Re: Rpm stage 1 turbo

Just got this typhoon and it is suppose to have a rpm stage 1 turbo. Is there any way to adjust the boost? Right now it max's out at 15psi.

And the reason for raising the boost? If it is a stock truck with the stage1 turbo from RPM, you will only be boosting to a quicker rebuild on your motor unless you have other things done to it.

 

[cdprayor]

Re: Rpm stage 1 turbo

I think things are better left the way they are. I still have this idle issue to deal with and still seems too rich. No need to start causing other issues