Selling my Typhoon Clone

bender

Member
***Just to clarify as a few have asked, this is full syclone driveline pulled from a wrecked sy. I cant remember now which number it was, but this truck is all wheel drive.***

I am trying to get a syclone so I am putting this one up for sale. If it shouldnt be in this section it can move to the appropriate area.

This is not the average craigslist "typhoon clone" Myself and the PO put a lot of work into making it what it is. The body is from a 1987 Blazer, most everything else came from a syclone or typhoon. There are only a few items not accurate. No rust anywhere. Recent exhaust as well.

The engine is a syclone block, rebuilt less than 5k ago. Paint is good, a few blemishes. Cladding is all good. Interior is really good shape.

Few things wrong are striker bolt on drivers side has cracking around it, but the door functions properly, still seals tight and locks, it just moves a bit. Bottom of console cup had a hole drilled in it so I put an inverter in it so I could plug laptop in while logging. Headliner is sagging. Turbo has some up and down play but I couldnt get it to move in and out. Still builds good boost and makes no noises. Back window was replaced with frameless and is not tinted.

Only thing that is in the pics that is different is the overhead console temp and compass are in and functional, double gauge pod isnt there, gauges are stock color not white, Also has pioneer cdplayer now.

I can take pics of anything anyone wants to see, and answer any questions anyone might have.

Not really to sure of value, thinking of starting around 7000 and seeing what interest is.

SNC00219.jpg

SNC00220.jpg

SNC00221.jpg

utf-8BSU1HMDAyOTUtMjAxMDEwMDMtMTY0OS5qcGc.jpg

utf-8BSU1HMDAyOTYtMjAxMDEwMDMtMTY1MC5qcGc.jpg

SNC00225.jpg

SNC00226.jpg

SNC00227.jpg

SNC00194.jpg

SNC00201.jpg

SNC00202.jpg

SNC00203.jpg

SNC00204.jpg

SNC00205.jpg

SNC00206.jpg

SNC00207.jpg

SNC00208.jpg

SNC00209.jpg

SNC00210.jpg

SNC00211.jpg

SNC00212.jpg

SNC00214.jpg

SNC00215.jpg

SNC00216.jpg

SNC00217.jpg
 
Last edited:

bender

Member
Re: Selling my Typhoon Clone

That is a good looking clone!

Whats the mileage?

GLWS

Not really sure since it has been pieced together. I dont have carfax or would run the vin and see what it shows. I will post a request, maybe someone can help me out.
 

bender

Member
Re: Selling my Typhoon Clone

I was going to remove some stuff to put on whatever truck I get but I think it would be easier to get new stuff. Thought I would add some details.

-Chip is HTP stock upgrade with EGR delete.
-Full silicone vacuum kit in black installed.
-Devils own non-progressive alky kit installed using washer bottle, also installed low level switch to led in dash.
-Engine tie down was purchased by indytyclone from here in GP, the aluminum one that bolts to the alternator bracket.
-New Ultima Red top
-ABS Deleted
-Battery shutoff switch under hood
-IC pump is shurflo model mounted under battery.
-Autometer 3 gauge pod with Autometer Ultra water, oil and boost.
 

2500avalanche

Well-known member
Re: Selling my Typhoon Clone

Man,
I love your truck. If I was looking for a DD right now, I would be all over this. Insurance of a 87 blazer, but the looks of a typhoon. Great mix.
Good luck with sale. If still around in a couple months, I might hit you up as I am starting to give my DD its last rights
 
Top