stock Typhoon leafs

Mephisto

These trucks are cursed
Your stock leafs springs... SELL THEM TO ME!
75241_289cca9d54a95391a315a3cbc1af8172.PNG
 

Mephisto

These trucks are cursed
Nice! How are they? Probably need new bushings?

Just out of curiosity... what'd you replace the stockers with?
'
 

Mephisto

These trucks are cursed
really? you don't find them too bouncy? at ride height my springs are practically flat with no curve at all. When I go over bumps it feels like the springs are bending backwards. The shocks don't really make a difference with this either. I have the Viking adjustable shocks and if I make them too soft, it's like I'm driving a boat... If i stiffen them up a bit, then it feels like the shocks aren't giving, and the springs are bending backwards which gives the jackhammer effect. I never had this problem on my syclone or my old blazer that had stock springs and 3" blocks.

I found this place... but I know our springs are Ty specific, so I'm not sure this is a viable option...
https://www.generalspringkc.com/Lea...C_S10_Sonom_Blazer_Jimmy_1982_1994_s/1837.htm

What're ya asking for yours?
 

Static

Member
I think mine rides good for as low as I have it. I have edelbrock shocks and a half inch block and the Beltech rear sway bar. Ive got weight in the back also. What are these worth? Id prefer local pickup in AZ.
 

Mephisto

These trucks are cursed
I haven't a clue what they'd actually be worth haha... What's your kneejerk price? I'd have to have em shipped though.

I'm leaving on vacation for a month, and when I get back I have to give my Audi back as part of the whole "dieselgate" fiasco (there goes my 40mpg). So by the time I drive my Ty out there at $4.09/gal and 11mpg, I could just buy the JSM 4-link hahaha.

Shipping them should be pretty easy... think of how your Belltech's showed up. You don't need to box em up, I can email you the shipping labels, and then take the leafs down to any ol UPS store, and ask for a couple of those clear UPS envelopes that peel n stick (the ones they usually put a packing list or bill of lading in)... pop the labels in there, wrap them around the leaf and you're good to go. These might be the one thing UPS can't break. Maybe wipe em down a lil bit first so the driver doesn't get rust n muck all over his hands haha.
 
Top