Suspension bushings

[Dan B]

My 93 ty is stock with low miles, getting ready to replace original tires and shocks.. was thinking it may be a good time to go thru all of the suspension bushings as well being 30 years old now.

Any recommendations on what brand to go with?

 

[Slyclone]

Just use factory rubber. Seen some poly go hard, crack and no good.

 

[Dan B]

I was leaning that way but wasn't sure if all that stuff was still available.. where can I get them?

 

[Slyclone]

You can try rockauto, or ebay with a few keywords to derive a part number and take it from there.

 

[Bo Cee]

To anyone here that’s purchased and installed above mentioned replacement bushings...is the ride acceptable after install and an alignment? I was ultimately looking to modernize it but would love feedback on a stock fix. Thanks

 

[1blkc4]

I used the acdelco advantage series it rides fine I did get an alignment done too .

 

[Bo Cee]

Thanks I’ll look into them

 

[gmemony2]

Bo Cee and Dan B, what did you end up using for the suspension bushings?

 

[Bo Cee]

I haven’t done anything yet. Hopefully next year

 

[Dan B]

X2 I have more questions than miles on my truck.. what I did learn from researching I'll likely go with the acdelco advantage ones mentioned above & definitely not poly

 

[gmemony2]

Did you find part #s for the acdelco advantage? Were they on Rock auto? I couldn't be sure I was finding the right stuff.

 

[Dan B]

I just search "gmc typhoon ac Delco advantage suspension bushings".. an ebay link comes up, scroll thru & they come up

 

[wildphil]

When I go with stock type suspension parts. Moog is what I always use. They have always been good quality and last for a long time on the vehicles I have used them on.

 

[the1]

Hy,

I have in my other cars Superpro and will make also bushes in the GMC I have found this company

https://www.prothanesuspensionparts.com/products/gmc_typhoon_4wd_1992

fit this also?

https://www.prothanesuspensionparts.com/72033

I will change all…….

 

[Bo Cee]

Thanks