MyGMCSyclone
New member
Sale Pending :lol:
Hi guys,
I hate to do this but I have to get rid of my Syclone #2195.
I have to get rid of some debt due to trying to buy a house. I currently have a personal loan and used the SY as collateral and have to reduce my debt.
The truck has been sitting for 2 years now with a blown motor. I have most all the internal parts for the motor that cost me a little over $2300 from RPM. (See below for the list of new parts)
The motor & trans has been removed. The motor has been disassembled and ready to go to the machine shop was about to take it in for the work then had to use the $$$ :tdown: as a down payment for the little ladies new car (only debt I can keep) as hers got totaled :rant: and the insurance barley paid it off. All the parts have been bagged and tagged when pulled and disassembled.
The truck it’s self is in good shape other than it could use a new paint job. This is a CA truck and I have seen no rust anywhere. The right rear cladding has a crack and a hole. The crack has been reinforced but still need to fill the hole. The left rocker cladding had a hole but that has been repaired. I have a cowl hood for it and the stock hood. I would rate the rims at an 8 (10 would be excellent) the interior is in good shape but has a small burn in the drive seat bottom but I have a replacement stock cover for it.
I have 2 transmissions for it one has issues but the other is in good shape.
I have a set of rebuilt heads that I got from “Boosted SUV” from an e-bay auction. Only has about 1000 miles on them according to him (if i remember correctly) and I have never used them yet.
The truck has 103,528 miles on it.
In have to get $4500 for it to get it out of the loan. I hate to let it go as I really like it but I’d rather have a house now and in a year or two I’ll be ready to get another one. :tup:
Click the below link for pictures.
http://s1187.photobucket.com/albums/z399/russcrow/
So please help me out on getting rid of this. Thank you for looking…
Russ Crow
Contact me at
Here or
russcrow@comcast.net
209-640-2504
SRP 4.03 PISTONS
JE PRO SEAL RING SET 4.03
CUSTOM GRIND CAM (STOCK CHIP)
VICTOR REINZ UPPER GASKET SET
VICTOR REINZ LOWER GASKET SET
COMP CAMS PRO MAGNUM LIFTERS
COMP CAMS 1.5 SELF ALIGNING ROCKERS
COMP CAMS HIGH ENERGY PUSHRODS
ARP HEAD BOLTS
ARP BALANCER BOLT
ARP FLEXPLATE BOLTS
ARP MAIN BOLTS - 2 BOLT
PIONEER PERFORMANCE BALANCER
DOUBLE ROLLER TIMING CHAIN
CAM BEARINGS
RPM OIL PUMP KIT
ALUMINUM TIMING CHAIN COVER
BILLET POINTER 6.25"
New Syclone throttle body
Hi guys,
I hate to do this but I have to get rid of my Syclone #2195.
I have to get rid of some debt due to trying to buy a house. I currently have a personal loan and used the SY as collateral and have to reduce my debt. The truck has been sitting for 2 years now with a blown motor. I have most all the internal parts for the motor that cost me a little over $2300 from RPM. (See below for the list of new parts)
The motor & trans has been removed. The motor has been disassembled and ready to go to the machine shop was about to take it in for the work then had to use the $$$ :tdown: as a down payment for the little ladies new car (only debt I can keep) as hers got totaled :rant: and the insurance barley paid it off. All the parts have been bagged and tagged when pulled and disassembled.
The truck it’s self is in good shape other than it could use a new paint job. This is a CA truck and I have seen no rust anywhere. The right rear cladding has a crack and a hole. The crack has been reinforced but still need to fill the hole. The left rocker cladding had a hole but that has been repaired. I have a cowl hood for it and the stock hood. I would rate the rims at an 8 (10 would be excellent) the interior is in good shape but has a small burn in the drive seat bottom but I have a replacement stock cover for it.
I have 2 transmissions for it one has issues but the other is in good shape.
I have a set of rebuilt heads that I got from “Boosted SUV” from an e-bay auction. Only has about 1000 miles on them according to him (if i remember correctly) and I have never used them yet.
The truck has 103,528 miles on it.
In have to get $4500 for it to get it out of the loan. I hate to let it go as I really like it but I’d rather have a house
now and in a year or two I’ll be ready to get another one. :tup:Click the below link for pictures.
http://s1187.photobucket.com/albums/z399/russcrow/
So please help me out on getting rid of this. Thank you for looking…
Russ Crow
Contact me at
Here or
russcrow@comcast.net
209-640-2504
SRP 4.03 PISTONS
JE PRO SEAL RING SET 4.03
CUSTOM GRIND CAM (STOCK CHIP)
VICTOR REINZ UPPER GASKET SET
VICTOR REINZ LOWER GASKET SET
COMP CAMS PRO MAGNUM LIFTERS
COMP CAMS 1.5 SELF ALIGNING ROCKERS
COMP CAMS HIGH ENERGY PUSHRODS
ARP HEAD BOLTS
ARP BALANCER BOLT
ARP FLEXPLATE BOLTS
ARP MAIN BOLTS - 2 BOLT
PIONEER PERFORMANCE BALANCER
DOUBLE ROLLER TIMING CHAIN
CAM BEARINGS
RPM OIL PUMP KIT
ALUMINUM TIMING CHAIN COVER
BILLET POINTER 6.25"
New Syclone throttle body
Last edited:
