Syclone 569 11.39@116mph

[JRoyPDX]

I've actually gone 11.37@114mph too, but here's a video from my last trip out.

1.56 60ft is the best it's done
Best eighth is 7.18 @94mph

https://www.youtube.com/watch?v=AoASULmO-jw

 

[Slyclone]

Hi I saw the video. Launches look aggressive. Do you know what grind the cam is from comp? 410,412,415..? Or larger. Also what trans setup are you running?

Nice times. Are you running a tweaker chip?

 

[JRoyPDX]

Hi I saw the video. Launches look aggressive. Do you know what grind the cam is from comp? 410,412,415..? Or larger. Also what trans setup are you running?

Nice times. Are you running a tweaker chip?

The cam is a 412. Trans is a 700r4 with a vette servo and a 3500rpm converter.

It is a TT chip, but I'm currently installing a Holley HP

 

[Slyclone]

The cam is a 412. Trans is a 700r4 with a vette servo and a 3500rpm converter.

It is a TT chip, but I'm currently installing a Holley HP

Interesting.

I think all syty 700r4 transmission had a vette servo out of the box.. as well as a specific calibration plate on the valve body .

Put some photos up of your engine bay if you could.. just curious to see what else is going on with out asking a ton of questions.

 

[JRoyPDX]

Interesting.

I think all syty 700r4 transmission had a vette servo out of the box.. as well as a specific calibration plate on the valve body .

Put some photos up of your engine bay if you could.. just curious to see what else is going on with out asking a ton of questions.

Could be something different, but mine shifts at almost 5900rpm so I know something ain't stock.

 

[Slyclone]

Don't forget that wrench under the hood...

 

[JRoyPDX]

Its not there. Truck is torn apart right now. The cowl cover isn't even installed.