George Blake
DONATING MEMBER
I made a few of these when a gentleman asked for one so I could get a little better price on machining to make it more practical to have done. These are cryo'd. These are meant to be used with advanced adaptors plate that is 5/8" thick.
The existing shafts out there are not long enough. The pic shows the shafts side by side.
$300 shipped in the lower 48. If you need a part number for the TH400 adaptor plate, let me know.
Link to the ad with pics:
Th400 link
The other forum had very few views. I posted it again here in case someone is considering the TH400 and keeping AWD.
If one of the mods sees this, would you mind leaving it up in this forum for a couple days and then removing it?
The existing shafts out there are not long enough. The pic shows the shafts side by side.
$300 shipped in the lower 48. If you need a part number for the TH400 adaptor plate, let me know.
Link to the ad with pics:
Th400 link
The other forum had very few views. I posted it again here in case someone is considering the TH400 and keeping AWD.
If one of the mods sees this, would you mind leaving it up in this forum for a couple days and then removing it?