Things done over spring break to the ty....lots of pictures

nallj92

nallj92

Active member
Re: Things done over spring break to the ty....lots of pictures

Anthony- yeah i found the braket, but the t-bolts bottom out before they fully tighten so it still slips off with the aquamist nozzles on, gotta figure that out
Dan-yeah find me one of those, i was gonna call and ask about them, if you see one get one for me.
no other news, waiting on getting the romulator back...
 
D

dhorsman2000

Member
Re: Things done over spring break to the ty....lots of pictures

Any plans for a spring cruise? I am looking forward to meeting all you MN guys this summer :tup: What about a trip to Rock Falls? Wouldn't that be cool to show up with 4 or 5 trucks! Are you MN guys into tunning your trucks with the chips and what not? I still haven't gotten one yet because I'm unsure if I should do the add-ons and then get the chip programed for it or if I should get the chip and then update it as I get my bigger turbo, torque conv, etc. I'm just happy the snow is finally going away!!!! :woot:
 
nallj92

nallj92

Active member
Re: Things done over spring break to the ty....lots of pictures

hey, yeah were gonna try and work out something for a cruise, im going to be at school tilthe end of june so spring wise maybe when im home for a week. Looking into cedar falls( house of hook) for group run, or maybe up to sabin later in the year. Yeah a couple of us have tuning software and such, so we can get ya started with that if you like. Yeah the snow sounds all gone in the TC, up here in michigan i just went snowmobiling and put on 150 miles yesterday.
I"ll try to get something going when im home inbetween semesters( 1st week in may).
 
sy1907

sy1907

SYCOTIC
Re: Things done over spring break to the ty....lots of pictures

Yeah J, i can pick you one up and drop it off at your house or something.
dhorsman2k, where you located? I don't ever ever plan on going to slippery rock, so maybe you should count on coming down to cedar falls with us. We do some chipping up here, not phil long style, but we represent a little:tup:
 
nallj92

nallj92

Active member
Re: Things done over spring break to the ty....lots of pictures

dan you da man! also you could drop off your 2 step also for some testing, and maybe those nittos too:)
ill give you some meth in return(the kind for the truck duh!)

side note: im not planning on nats due to school, but others from MN might.
 
sy1907

sy1907

SYCOTIC
Re: Things done over spring break to the ty....lots of pictures

Yeah, if you promise to spin the nittos until you break so you can be like me, then you can use them for shizzle.
Don't know if i'm going to be attending nats either. Might just have to make a grand entrance to the 07 nats.......? Money is super tight, as in paying to get the motor back from Randy is a small issue, hahaha. plus, that was half the fun driving down there with you guys and bantering back and forth on the walkies like smoky and the bandit!
p.s. hope you didn't throw those hoses away you sum' bich!
 
nallj92

nallj92

Active member
Re: Things done over spring break to the ty....lots of pictures

yeah i got the hoses, ones still on the truck, it barely fit but i didnt need much. oh ill probably break something this year, its my turn after all. 07 nats? the way school is going ill never have time for nats until like 09, haha. ok gotta go take a test now.. ick
 
sy1907

sy1907

SYCOTIC
Re: Things done over spring break to the ty....lots of pictures

school shmool, you don't need that crap. When are you coming home next?
 
tbauer03

tbauer03

TRBOBOX
Re: Things done over spring break to the ty....lots of pictures

I would also be interested in an engine tie down like yours
 
nallj92

nallj92

Active member
Re: Things done over spring break to the ty....lots of pictures

dan ill be home the 1st week in may

ted, ill see what i can do this weekend for trying to get a jig or something formed, what kind of material would you like? i can do it in mild steel like mine? or something thinner? not sure what would be a preference?
 
D

dhorsman2000

Member
Re: Things done over spring break to the ty....lots of pictures

Dan, I live in Prior Lake, you? How far is Cedar Falls from Minneapolis? I'd be down for a couple runs, as long as it isn't like 3 hours from my place :D
 
sy1907

sy1907

SYCOTIC
Re: Things done over spring break to the ty....lots of pictures

you aren't by chance the guy who bought doomsdead's ty are you? (the one painted yellow and purple) I'm in Richfield, but down in PL all of the time off of Franklin Tr and bounty rd. One of my good buddys lives down there. If you do have this ty, i've seen you many-a-times tooling around town.
Cedar Falls is about 3-3.5 at the most hrs from Mpls. It's really not that bad, pretty straight shot. If you're going to take the time to go to a track, CF is WAYYYYY better than rock falls. Seriously a 1.8 at rock will net you a 1.7maybe a 1.67 at CF the way it hooks. We're thinking of getting a larger size gathering together a little later in the year, maybe around august or sept when the sun is high and the air a bit cooler hopefully. You should give justin or i you contact info so we can shoot the shit and show you how to properly break your truck!
 
Mikel2000

Mikel2000

New member
Re: Things done over spring break to the ty....lots of pictures

hey nallj92 let me know if you can make another one also?
 
Flyin Ryan

Flyin Ryan

hated cuz he drives fords
Re: Things done over spring break to the ty....lots of pictures

nallj92 said:
ted, ill see what i can do this weekend for trying to get a jig or something formed, what kind of material would you like? i can do it in mild steel like mine? or something thinner? not sure what would be a preference?
Click to expand...

If you happen to have one left over please hook me up with a mild steel one then :tup:
 
You must log in or register to reply here.
Top