Throttle Body

[Don W.]

Did some searching but still not positive. Who does the TB mod with bearings and seals? Arizona Speed? Or??

TIA

 

[typhoon92]

Re: Throttle Body

Look here
http://www.syty.net/forums/showthread.php?t=35741

 

[Don W.]

Re: Throttle Body

That was the thread, thanks much.

 

[gjp]

Re: Throttle Body

It helped calm my idle down and felt a slight throtle response increase in the mid/high range. Think there are some pics I posted in that thread above.

 

[Don W.]

Re: Throttle Body

It helped calm my idle down and felt a slight throtle response increase in the mid/high range. Think there are some pics I posted in that thread above.

Looking for both, calmer idle and throttle response. Saw the pics. Thanx.

 

[gjp]

Re: Throttle Body

I did the tube test and had a bad leak. I was only holding 17lbs of vac. After It went up to 19-20lbs.

 

[jbone]

Re: Throttle Body

I did the same and went through the guy Matt who was mentioned in the above thread. I sent it out and got it back in just over a week total. His work is absolutely flawless!!!!! I really didnt want to put it back in the truck. I wish I could tell you how it affected anything but I cant b/c I did it at the same time I did the injectors, chip, turbo, etc. so now my truck is all f'ed up

Tip: Dont forget to order the airfoil with it.

 

[Don W.]

Re: Throttle Body

I did the same and went through the guy Matt who was mentioned in the above thread. I sent it out and got it back in just over a week total. His work is absolutely flawless!!!!! I really didnt want to put it back in the truck. I wish I could tell you how it affected anything but I cant b/c I did it at the same time I did the injectors, chip, turbo, etc. so now my truck is all f'ed up

Tip: Dont forget to order the airfoil with it.

Budget is tight right now with all the stuff I'm doing. Mounts, 3" exhaust all the way. HD front drive line, to name some of the big ones. But I really want this because I've heard nothing but good about it. In addition I do have shaft play and rough (not always the same) idle. I have a foil so will get that in the new one.

Thanks.

 

[gjp]

Re: Throttle Body

if you have an aluminum foil he cam make it work with the 52mm. he did mine.

 

[jbone]

Re: Throttle Body

Budget is tight right now with all the stuff I'm doing. Mounts, 3" exhaust all the way. HD front drive line, to name some of the big ones. But I really want this because I've heard nothing but good about it. In addition I do have shaft play and rough (not always the same) idle. I have a foil so will get that in the new one.

Thanks.

I think it was somewhere around $150 to get it done, but I cant remember exactly