Trans slippin in first

[Olskoolturbo]

This has never happened before but in the last three days when iI drive around town and the trans warms up it starts to slip from a standstill. I have not been driving it hard, except from a 40mph roll with a cbr600. :lol: If I drain all the fluid and replace it with new will it last for a little bit longer? Any thoughts would be appreciated.

 

[jwaller]

Re: Trans slippin in first

ya you might give it a few more miles of life but I doubt it. make sure you tv cable hasnet slipped. you might also wanna trighten it up as much as possible to help give it a few more miles of life but it's about over.

 

['JustDreamin']

Re: Trans slippin in first

Hey Waller, what about using some quantity of Type F fluid to make the clutches / fluid "stickier"?

Also need to make sure that its full of fluid (I expect that it is) because that seems to make them shift funny too (sadly from personal 700R4 experience).

'Dreamin'

 

[jwaller]

Re: Trans slippin in first

ya type F might help you out some and at this point it might be worth it for you to try it. type F just has more friction modifiers that help the clutches bite into the steels making for firmer shifts.

 

[MAITAI1993]

Re: Trans slippin in first

what is it that you need to do to check your TV cable..

 

[Olskoolturbo]

Re: Trans slippin in first

ya type F might help you out some and at this point it might be worth it for you to try it. type F just has more friction modifiers that help the clutches bite into the steels making for firmer shifts.

Is that the composition of Trick shift?

 

[jwaller]

Re: Trans slippin in first

yes trick shift is type F.

the inner sheath of the tv cable should be pushed all the way to the drivers side in your case.

 

[MAITAI1993]

Re: Trans slippin in first

I dont know waht it looks like or where it is heard about it and talked about it but never had to do anything with it.
I still have a hard shift from 1 st to 2 nd its harder in DRIVE than OD but only in DRIVE it downshifts hard. someone told me I need a small adjustment on my TV cable dont know
im going to do a refresh (ATR) kit and a 2800 stall so we shall see....
oh ya a lil sound when its cold from PARK to REVERSE

 

[jwaller]

Re: Trans slippin in first

im going to do a refresh (ATR) kit and a 2800 stall so we shall see....
oh ya a lil sound when its cold from PARK to REVERSE

I dont know what a ATR kit includes but I'm guessing it's not much and I'm sure it's mostly stock stuff. ie stay away.

sounds from park to REV is normal to some extent. it's called driveline clunk if it's what I think your hearing.

 

[Olskoolturbo]

Re: Trans slippin in first

I''m gonna try the tv cable tommorow. might give me a few more miles but no boost lauches and no FAST GAST meet.

 

[Olskoolturbo]

Re: Trans slippin in first

Hey Jwaller, pm me with a price for a streetable rebuild. and who is the best to ship to u.

 

[kwick6]

Re: Trans slippin in first

I dont know waht it looks like or where it is heard about it and talked about it but never had to do anything with it.
I still have a hard shift from 1 st to 2 nd its harder in DRIVE than OD but only in DRIVE it downshifts hard. someone told me I need a small adjustment on my TV cable dont know
im going to do a refresh (ATR) kit and a 2800 stall so we shall see....
oh ya a lil sound when its cold from PARK to REVERSE

http://syty.huryde.com/gallery/Transmission/aaa?full=1

Push in on the metal tab, then push the cone shape piece (in green circle) all the to the drivers side as far as it will go, then rotate the linkage all the way to WOT slowly. The teeth on the back will click as you rotate.

 

[100in6]

Re: Trans slippin in first

just wanted to through this in. when you give the tv cable a few tuggs have the car running. i'm not sure and sure would advise listening to john more than me, but i do think having the car running makes a difference.

hey john... do you think it could be his torque converter? when i broke mine once i got a clanking from the tran and it turned out i broke the converter. i'm bettin it's clutches. let me know if i'm close

good luck

les

 

[kwick6]

Re: Trans slippin in first

just wanted to through this in. when you give the tv cable a few tuggs have the car running. i'm not sure and sure would advise listening to john more than me, but i do think having the car running makes a difference.
good luck

les

I have had some gunk hang up the TV valve, after a trans R&R. That plastic connector in the red circle just snaps on, so pop that off with the engine running and while depressing on the metal tab in purple circle, you can give it a few 5-10 quick pulls on the cable. Then turn the engine off and reset the cable again.

 

[MAITAI1993]

Re: Trans slippin in first

sweet...
thanks

 

[Olskoolturbo]

Re: Trans slippin in first

Yeah good stuff, I will try that when I get home tonight!