Re: tuning on ebay?
The SyTy is different, but all the concepts are still the same as any other older model vehicle with a turbo on it. All vehicles from 1985-1993 that had a turbo had the same computer as a SyTy. And the last one I tuned is on my Ebay Feedback profile. It was a 1988 Sunbird Turbo. He sent me many pictures of his car. It looked brand new. It was a great car. Stock, it had 215 put to the ground. He never modified the engine, but he did have some electronics that would keep his ECM from cutting fuel so he could run 18lbs. of boost. He wanted a chip that he could use, so he could get rid of his Fuel Defender(the box he was using to keep fueling up to 18lbs. of boost.) So I made him one, for a stock engine, where he could push 18lbs., and kept it within it's safe limits for a stock engine. He emailed me back, after the Dyno and he had went from 215 to 260HP to the ground on his stock engine. You can email him if you like and he can tell you how well it now performs. I can safely raise your boost, and still keep the fueling and timing working great together without causing engine harm. I can make your engine run alot cooler, remove everything that trys to cut your fuel. You name it, it can be done. And to guy who talks about finding the code for "turbo spooling": There are no computer sensors hooked up to your turbo, so how in the H*LL is the computer going to control your turbo spooling time. If you tune an engine correctly, you can definitely speed up the spooling process by cutting the spooling time atleast in half. You can criticize my work all day long, but I have plenty of feedback on Ebay to prove that what I do, works. Get on Ebay and take a look at other sellers who sell fake products. They can only maintain a good feedback rating for so long before they end up pissing atleast one person off and getting back feedback. I have absolutely %100 positive feedback. That means that I do my job. I have email after email saved in my PC's directly where customers have emailed me back praising me on how good my skills are. I have had customers put V8 engines underneath their V6 ECM, and called me to make it run right. That is a rather pain to do, as I have to changed every single calibration on the chip, but it is not impossible. So what I do is not a fake. And I don't have to go, Forum to Forum to find people talking about me. Because every single time a customer clicks on one of my Ebay Listings, I can see the link he came from to find it. I have been watching what yall say about me for about a month now and thought it was time to say something.
. If we had enough brains to walk across the street, we’d all walk away from these rolling money pits called trucks :2cents: ! 