Turbo advice

[ppress79]

I've decided to go to a gt3582r turbo but what do I do for exhaust and boost control? Internal gate or external and a lot of fab work?

Phil

 

[Quickstop [UK]]

Re: Turbo advise

Re: Turbo advise

I have that turbo and it is excellent. I have an external WG controlled by a Greddy Profec B2 system. I need to dial it in. The WG is a Tial 42 mm I think. The exhaust vents back into the DP.

You may need a spacer for the stock manifolds and also to grind a bit of your AC bracket in order to get it to fit.

Click on the link in my sig to my build thread. The first post has a section on GT35R installation. HTH.

 

[ppress79]

Re: Turbo advise

Re: Turbo advise

I have that turbo and it is excellent. I have an external WG controlled by a Greddy Profec B2 system. I need to dial it in. The WG is a Tial 42 mm I think. The exhaust vents back into the DP.

You may need a spacer for the stock manifolds and also to grind a bit of your AC bracket in order to get it to fit.

Click on the link in my sig to my build thread. The first post has a section on GT35R installation. HTH.

Good info in your thread. Do you have pictures of wastegate set-up? where you tap into exhaust before turbo.

Phil

Very nice work on your builds.

 

[Quickstop [UK]]

Re: Turbo advise

Re: Turbo advise

Thanks mate, very kind of you!

Here is a pic I took when I was building it all...

DSC00166.jpg Photo by UKTyphoon | Photobucket

 

[ppress79]

Re: Turbo advice

Thanks mate, very kind of you!

Here is a pic I took when I was building it all...

DSC00166.jpg Photo by UKTyphoon | Photobucket

Which exhaust housing is that? I have only been able to find v-band or 4 bolt ones. What you have would be much easier.

Phil

 

[Quickstop [UK]]

Re: Turbo advice

That was a PTE housing that RPM had. They did the 3" dp and fed the wastegate back into the exhaust.

 

[ppress79]

Re: Turbo advice

thanks, I'll call Mike.