turbo lines

[go_faster]

this may sound like a dumb question but I took the frame out of my ty to have it zinc plated and painted and when I was putting things back together I think I misplaced a part. I need help with the routing of the lines from the stock turbo. Two lines go down toward the pan. One enters the pan as an oil return and the other one just stops at a silicone hose. I must have lost a tube that goes from there to somewhere. Can anyone tell me where that line leads and I will make a line to fix it.

thanks in advance.

Chris

 

[sharkbait]

Re: turbo lines

i was just mocking up my new motor. its an IBS (not syty original) i couldnt remember where the drain for the coolent goes too. i think they go into the block. the oil return goes into the oil pan.

im switching over to braided, and the coolent lines are -6. oil feed is -4. oil drain is -10.

hope this helps.

 

[blk00z28]

Re: turbo lines

If your talking about the turbo coolant return line, yes. It goes into the block around the area of the motor mount on the pass side. I have a picture of it, but its on my computer.. (I'm on my phone)

 

[sharkbait]

Re: turbo lines

i think thats waht hes talking about. he located the oil return in the oil pan.

 

[blk00z28]

Re: turbo lines

If I remember right its a 3/8" fitting.

 

[go_faster]

Re: turbo lines

The block, right, i remember that fitting. That's the problem with waiting 6 months to reassemble. Thanks!

 

[Flyin Ryan]

Re: turbo lines

 

[nr94]

Re: turbo lines

[/URL][/IMG]