Turbo Oil Feed Fitting

[sytyguy]

Anyone have a feed fitting (the adapter that screw into the block that the turbo oil feed line connects to) lying around they wanna sell? Otherwise, anyone know the sizes of the fitting (I'm thinking it's a 3/8" pipe to -4 AN adapter).

 

[CC801]

Re: Turbo Oil Feed Fitting

I should have one, ill check when i get home tonight.

 

[sytyguy]

Re: Turbo Oil Feed Fitting

Sweet. Just LMK what you find.

 

[CC801]

Re: Turbo Oil Feed Fitting

I have one. Figure out the cheapest way to get it to ypu and it's yours.

 

[sytyguy]

Re: Turbo Oil Feed Fitting

Perfect. Just wrap it in a paper towel and toss it in an envelope or small box and send it to:

Hood
4736 US Hwy 80 East
Black Creek, GA 31308

And LMK your address and shirt size and I'll send you a "Thank you!"

 

[CC801]

Re: Turbo Oil Feed Fitting

Ill get it out in the am.

 

[sytyguy]

Re: Turbo Oil Feed Fitting

Just checking to see if this went out. Thanks!

 

[sytyguy]

Re: Turbo Oil Feed Fitting

Bump. Anyone else got a fitting they want to unload? I'll gladly pay you for it.

 

[mattw]

Re: Turbo Oil Feed Fitting

I got one at my local NAPA several years ago. I tried to find the receipt so that I could post the specs/part # but no such luck.. I just took the one of off of Renz's old 4.3 in with me and said that I need another one...

I'm not sure it it will help you but here is a pic of a stock fitting:

 

[262x02]

Re: Turbo Oil Feed Fitting

On my 02 vortec block it was a 1/4 NPT to -4 AN, but I have seen 3/8 NPT on the older blocks.