Turbo to intercooler ?'s

tybanman

New member
I have put ATR headers and turbo on my ty. But left the upper I/C stock. this left a nasty kink in thetube from the turbo to the I/C. Any suggestions.
 

Flyin Ryan

hated cuz he drives fords
Re: Turbo to intercooler ?'s

Post up a picture to help us figure out what you mean.. if your referring to how the upper ic only has a 2inch inlet then some people have cut that off and welded up there own 3incher etc but other then that only thing else would be to contact waller to see if he has one of his larger upper ic's left. If not go air 2 air
 

tybanman

New member
Re: Turbo to intercooler ?'s

Here is what i'm talking about. With the headers and larger turbo the inlet on the upper intercooler sits too low.
IMG_1517.jpg


IMG_1520.jpg
 

Raist103

Engine Killer, iPhone Killer, Lawnmower Killer
Re: Turbo to intercooler ?'s

you need a silicone 90 should fit perfect was telling someone about this problem tonight.
 

Jimmy

Banned
Re: Turbo to intercooler ?'s

Reclock the turbo so it lines up with the IC,then get a 90 degree radiator hose and trim to fit.

760e.jpg
 
Top