Typhoon Bolt in 4 Link Success

Ty1642

Ty1642

Member
Re: Typhoon Bolt in 4 Link Success

My kit showed up today. It looks nice, but I need to finish up other projects before I can dive into it.
 
JSM

JSM

Active member
Re: Typhoon Bolt in 4 Link Success

MotoCam360 said:
Received the first delivery of my kit..... quality is top notch people!!!
Click to expand...

Thanks, the rest of your parts are going out tomorrow. Just got your shocks machined.

I will start another thread tonight as details move forward, but we also were able to get started last night on the syclone kit. Mike is scheduled to get some real good before video before we pull the truck in for rear kit development and a full make-over. I am really excited about the solution we have come up with on the syclone to avoid the gas tank issue, with the goal of being a bolt in kit. I am 100% happy with the typhoon kit performance, but I will say the syclone kit if it works out will be even better. Something not available right now, so stay tuned.
 
MotoCam360

MotoCam360

Member
Re: Typhoon Bolt in 4 Link Success

The rest of my front and rear kit came in this week, along with the 80e cross member and torsion bar delete......really nice parts!!!!!!

Now for the install......
 
MotoCam360

MotoCam360

Member
Finally, the rear 4 link conversion is just about done:


xjD5RCyl.jpg


[IMG2=JSON]{"data-align":"none","data-size":"full","height":"480","width":"640","src":"https:\/\/i.imgur.com\/ysaCL17.jpg"}[/IMG2]
[IMG2=JSON]{"data-align":"none","data-size":"full","height":"480","width":"640","src":"https:\/\/i.imgur.com\/jp7zTx0.jpg"}[/IMG2]
 

Attachments

  • photo9826.jpg
    photo9826.jpg
    20.5 KB · Views: 0
MotoCam360

MotoCam360

Member
More progress today:

[IMG2=JSON]{"data-align":"none","data-size":"full","height":"480","width":"640","src":"https:\/\/i.imgur.com\/7FS0z4q.jpg"}[/IMG2]
 
MotoCam360

MotoCam360

Member
I think I'm in uncharted territory now... trying to connect Renzfabs C5 parking brakes with my Fbody calipers and make everything compatible with the JSM 4link crossmember, which obviously isn't working well. Anybody tried to do this yet and come up with something that works?

[IMG2=JSON]{"data-align":"none","data-size":"full","height":"480","width":"640","src":"https:\/\/i.imgur.com\/DiPsAlM.jpg"}[/IMG2]
 
MotoCam360

MotoCam360

Member
0-60N4;n1860366 said:
Got it figured out and going yet?
Click to expand...

The 4link and front coilover conversion is pretty much done. I removed the parking cables because the Renzfab stuff I have simply won't work. Need to figure something else out.

Now I'm working on the enhanced rear diff cover and there's a new modification that's needed for that.
 
You must log in or register to reply here.
Top