You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Value of a Sy 700R4 core?
- Thread starter camino70
- Start date
Re: Value of a Sy 700R4 core?
If its never been rebuilt, probably $300-$350.
camino70 said:Curious what a 700R4 out of a '91 Sy might be worth in poor condition?
TIA,
Ron
If its never been rebuilt, probably $300-$350.
Captain Morgan
Moderated User
Re: Value of a Sy 700R4 core?
Past that it wouldnt be worth more than $100 - $150 IMO.
BTW, whats up Ron!!! Long time no see! :tup:
:stupid: as long as its known 100% original, the valvebody alone is what gives it value. I was gonna go with $300.kwick6 said:camino70 said:Curious what a 700R4 out of a '91 Sy might be worth in poor condition?
TIA,
Ron
If its never been rebuilt, probably $300-$350.
Past that it wouldnt be worth more than $100 - $150 IMO.
BTW, whats up Ron!!! Long time no see! :tup:
Thanks for the replies guys, I appreciate it. It is out of a '91 Sy with the correct valve body and I believe billet servo. I think the clutches are toast, but I am in now way sure.
Morgan,
Things are going well. I am starting a project of putting a built turbo 3.8 in my El Camino. The motor/trans combo went 12.00 at 116mph in my old 3300lb regal. I only had street tires, so I came out of the hole pretty soft.
How things with you?
Ron
Morgan,
Things are going well. I am starting a project of putting a built turbo 3.8 in my El Camino. The motor/trans combo went 12.00 at 116mph in my old 3300lb regal. I only had street tires, so I came out of the hole pretty soft.
How things with you?
Ron