ViciousV6
400HP/550FTLB
Gigantic Front Mount Intercooler, Bolts to Radiator Crossmember, wraps under frame and through Passenger Fender well and feed pipe goes between motor and radiator Size= 25x18x4 Core will not fit with A/C on truck, includes all piping, even has alky injection ports for fittings and nozzles and will bolt right onto Accel 1000 cfm throttle body or can be cut for hose coupler.My intake air temps were about 5-10 degrees more then outside temps on all data logs. ( I do have a local guy interested, would prefer Pick-up)
$ 1,650.00 shipped in US Plus Paypal Fees
Could always buy this one from RPM For $$1265.00 Plus shipping
http://www.sytyperformance.com/inde...facturer_id=0&option=com_virtuemart&Itemid=26
Almost Brand New PTE-74-GTQ Supports up to 900-950 HP but is an awesome turbo for a built motor with Vortecs. Only Dyno Time and 100-150 miles on turbo.
$ 1,000.00 Shipped Plus 3% Paypal fees in US (would cost 1350 plus shipping to buy it new)
***SOLD**** 12SecSS
Built and Proven 700R4 With TCS 2800 Stall 9/11 Converter (this trans ran consistant mid-low 11's on soft launches and manual shifting, or leave it automatic. I will throw in the B&M lock-up controller for ya(cost 2400 build trans and 700 for converter ****SOLD***
Custom Made Remote Oil Cooler system, Engine mount with fittings, oil filter mount with fittings, B&M oil cooler, all -8an lines with fittings and Hose seperators
$ 375.00 Shipped (No Paypal Fees) ***SOLD****
Perfect Working order Crane Hi-6 Ignition Module and wire harness, just piggy backs stock wiring and gives you much better spark and hotter spark.
$ 125.00 Shipped (No Paypal Fees)
RPM Modded A/C Bracket Delete kit! Included brand new belt, BRacket to mount on head, bolts, spacer, F-Body Tensioner and bolts for mount tensioner. Complete!
****SOLD***** MaxPSI
Big Stuff 3 Unit ( Full Stand Alone Unit with LS1 Wire Harness, WBo2 , Calport for datalogging, Fuel Pump trigger wires, elec fan wires, Two Step Built in) Nothing cut other then Dist. Connection and still have original connector. Also included 4L80E/4L65E Conector and Harness with Trans Controller
$ 3,000.00 Shipped in US ( No Paypal Fees) Will even include Program for GT35R With Spec Cam Applications)
Phil Chivers Front and Rear Driveshaft loops Perfect condition.
$ 175.00 Shipped (Add Paypal Fees)
March Polished Aluminum Underdive Pulley Set Water Pump and Crank in Good Condition $ 135.00 Shipped ( Add 3% Paypal Fees)
**** SOLD***** Necrowolf
Tilton Hig Torque Starter 153/168 Teeth Flywheel Perfect condition-Never had problem
$ 200.00 Shipped ( No Paypal Fees.)
Paypal Acct. Boostinblazer92@aol.com
Questions Post Here or Email me @ Boostinblazer92@aol.com
Ralph
$ 1,650.00 shipped in US Plus Paypal Fees
Could always buy this one from RPM For $$1265.00 Plus shipping
http://www.sytyperformance.com/inde...facturer_id=0&option=com_virtuemart&Itemid=26
Almost Brand New PTE-74-GTQ Supports up to 900-950 HP but is an awesome turbo for a built motor with Vortecs. Only Dyno Time and 100-150 miles on turbo.
$ 1,000.00 Shipped Plus 3% Paypal fees in US (would cost 1350 plus shipping to buy it new)
***SOLD**** 12SecSS
Built and Proven 700R4 With TCS 2800 Stall 9/11 Converter (this trans ran consistant mid-low 11's on soft launches and manual shifting, or leave it automatic. I will throw in the B&M lock-up controller for ya(cost 2400 build trans and 700 for converter ****SOLD***
Custom Made Remote Oil Cooler system, Engine mount with fittings, oil filter mount with fittings, B&M oil cooler, all -8an lines with fittings and Hose seperators
$ 375.00 Shipped (No Paypal Fees) ***SOLD****
Perfect Working order Crane Hi-6 Ignition Module and wire harness, just piggy backs stock wiring and gives you much better spark and hotter spark.
$ 125.00 Shipped (No Paypal Fees)
RPM Modded A/C Bracket Delete kit! Included brand new belt, BRacket to mount on head, bolts, spacer, F-Body Tensioner and bolts for mount tensioner. Complete!
****SOLD***** MaxPSI
Big Stuff 3 Unit ( Full Stand Alone Unit with LS1 Wire Harness, WBo2 , Calport for datalogging, Fuel Pump trigger wires, elec fan wires, Two Step Built in) Nothing cut other then Dist. Connection and still have original connector. Also included 4L80E/4L65E Conector and Harness with Trans Controller
$ 3,000.00 Shipped in US ( No Paypal Fees) Will even include Program for GT35R With Spec Cam Applications)
Phil Chivers Front and Rear Driveshaft loops Perfect condition.
$ 175.00 Shipped (Add Paypal Fees)
March Polished Aluminum Underdive Pulley Set Water Pump and Crank in Good Condition $ 135.00 Shipped ( Add 3% Paypal Fees)
**** SOLD***** Necrowolf
Tilton Hig Torque Starter 153/168 Teeth Flywheel Perfect condition-Never had problem
$ 200.00 Shipped ( No Paypal Fees.)
Paypal Acct. Boostinblazer92@aol.com
Questions Post Here or Email me @ Boostinblazer92@aol.com
Ralph
Last edited:
:tup:
