What did you do to your SY/TY today?

Status
Not open for further replies.

JSM

Active member
Re: What did you do to your SY/TY today?

held 2 jack stands down, engine held the engine stand from floating away
 

WyoSyclone

Active member
Re: What did you do to your SY/TY today?

Charging up my laptop now so I can finally drive the Sy tomorrow and see how it runs at 4k feet, instead of the old 900....
 

SloGN

9Sec Alky V6
Re: What did you do to your SY/TY today?

well time to hit the thread again!


Well i just drove my Sy to the theater tonight to see Madea goes to jail.


But all day today i worked on ty#1710 of nctyphoon's. The fuel pressure reg went bad and filled the engine up with fuel to the point that it hydro locked the engine from turning over. So i had to pull all the plugs out and drain the fuel out of the cylinders then replaced the bad reg and a new set of plugs. All was well till it killed the o2 sensor setting a code 44. well worked on here truck at her house with very limited tools so i had her drive it to my house where i swapped out the o2 sensor and she stated the the truck was making a bad squealing nose while driving. took the wheel off to find the front brakes wore down to wear tabs. I also changed the oil in it after i got it running! :tup:
 

eviltwin

"junkyard syclone"
Re: What did you do to your SY/TY today?

pulled the t-case, trans, front diff, and oilpan
securedownload-1-4.jpg
 

bezerk

New member
Re: What did you do to your SY/TY today?

tore all the cladding of my sy, and put it in the dumpster. that stuff is cheap anyway and every extreme has it :D
no, pulled it off for a repaint, rerouted my brake lines, fixed my battery, and took all of the cladding off of croscar his Ty. ****ing shit was metal rivvetted in place. had to drill and grind them all off
 

Big Mike

New member
Re: What did you do to your SY/TY today?

Took my heads off the shelf and took them apart so I can drop them off at the machine shop for re surfacing.
 

NCTyphoon

New member
Re: What did you do to your SY/TY today?

well time to hit the thread again!


Well i just drove my Sy to the theater tonight to see Madea goes to jail.


But all day today i worked on ty#1710 of nctyphoon's. The fuel pressure reg went bad and filled the engine up with fuel to the point that it hydro locked the engine from turning over. So i had to pull all the plugs out and drain the fuel out of the cylinders then replaced the bad reg and a new set of plugs. All was well till it killed the o2 sensor setting a code 44. well worked on here truck at her house with very limited tools so i had her drive it to my house where i swapped out the o2 sensor and she stated the the truck was making a bad squealing nose while driving. took the wheel off to find the front brakes wore down to wear tabs. I also changed the oil in it after i got it running! :tup:

Thanks Pat! Now I got to get some tires before my old ones crap out! I think I got my 6 years of driving out of them , lol. Here's a pic of Pat showing how to burp the intercooler :)
DCP_0013-3.jpg
 

SYCLONE#1531

'MOFOFAST
Re: What did you do to your SY/TY today?

I installed CAPTAIN MORGANS intercooler scoop!! Looks Great!!! Thanks, Morgan!!:tup::lol:
 

4C FED

Absolutum Dominium
Re: What did you do to your SY/TY today?

The Ty got new poly bushings installed in the control arms today.
 

SloGN

9Sec Alky V6
Re: What did you do to your SY/TY today?

Pat do you live under the hood of these things???



Well i seem to think so:tup: but somebody has got to do it and do it right.:tup:


Tell larry when he is ready to do the T-case i'm game to give him a hand.
 

cloneman315

Active member
Re: What did you do to your SY/TY today?

i found one cheap for him,its on its way,were are hoping we can just change it out.
 

SloGN

9Sec Alky V6
Re: What did you do to your SY/TY today?

i found one cheap for him,its on its way,were are hoping we can just change it out.



kewl


if you guys need a hand let me know:tup: Just a reminder he will need to go to the stealership to get the trans to transfer case gasket. The auto parts places don't carry them. Did you get a TY t-case if not the output shaft size is diffrent than a sy.
 
B

BoostedGMC

Guest
Re: What did you do to your SY/TY today?

It's from a 92 Bravada.
 

Windedv6

Ty n 10s
Re: What did you do to your SY/TY today?

I pulled my motor to check a few things. Will be setting it up for sequencial timing when it goes back in.

QPTUS-TT305cidEngineremoval14x6.jpg


AHHGG-TT305cidEngineremoval34x6.jpg


John
 
Status
Not open for further replies.
Top