What did you do to your SY/TY today?
- Thread starter SloGN
- Start date
- Status
Captain Morgan
Moderated User
Re: What did you do to your SY/TY today?
I rebuilt my electric cutout today.
it didnt want to open or close anymore so I took it apart to figure out why.
yay gears!!!!!!
motor fixed, gears back where they should be
... i guess i forgot to take pics after I put it back together, I was kinda running late, oops, lol
I rebuilt my electric cutout today.
it didnt want to open or close anymore so I took it apart to figure out why.
yay gears!!!!!!
motor fixed, gears back where they should be
... i guess i forgot to take pics after I put it back together, I was kinda running late, oops, lol
![Quickstop [UK]](/forums/data/avatars/m/5/5165.jpg?1570199786){kind=avatar}
Quickstop [UK]
Combating adversyty.
Re: What did you do to your SY/TY today?
Also, connected fuel harness. Getting reeeeeeal close
I am shitting myself.
Also, connected fuel harness. Getting reeeeeeal close
I am shitting myself.
qbnkiller
Conflaguration Specialist
Re: What did you do to your SY/TY today?
http://www.youtube.com/watch?v=A0B4B_5C9ZA
I took mine out, washed her up, and let her eat a little...
http://www.youtube.com/watch?v=A0B4B_5C9ZA
I took mine out, washed her up, and let her eat a little...
Re: What did you do to your SY/TY today?
I started to install my monomax shocks in the front and put my new slotted rotors on with C6 rims but what a pain in the ass getting the new shock in so I didnt even get one side done. The old one came out fairly easy because it was shot so I could compress it to get it on but the new one not so much and I havnt figure out a way to get it in yet. Any ideas or any links to anyone who has done this yet? Thanks
I started to install my monomax shocks in the front and put my new slotted rotors on with C6 rims but what a pain in the ass getting the new shock in so I didnt even get one side done. The old one came out fairly easy because it was shot so I could compress it to get it on but the new one not so much and I havnt figure out a way to get it in yet. Any ideas or any links to anyone who has done this yet? Thanks
Jersey 91/93
NASTE Member
Re: What did you do to your SY/TY today?
I'm dropping my Canyon off tomorrow to get a Rhino Liner installed, so I pulled the Ty into the parking lot so I could temporarily store the old drop-in liner in my garage. I'm just glad she started without a jump.
I'm dropping my Canyon off tomorrow to get a Rhino Liner installed, so I pulled the Ty into the parking lot so I could temporarily store the old drop-in liner in my garage. I'm just glad she started without a jump.
Nitrous
New member
Re: What did you do to your SY/TY today?
I installed a new ignition lock, new door locks, new radiator, new cigarette lighter, picked up my new KYB front shocks, picked up my new Clifford Alarm system, picked up a new gear reduction starter, ordered a new throttle cable and put a new water inlet valve on my washing machine LOL and that was all after work today. Oh, and I had to bypass the heater core because when I installed the radiator it couldn't handle the new pressure and started leaking on the floor of the cab. Thank god it's hot here in Houston and I don't need het right now! :lol:
I installed a new ignition lock, new door locks, new radiator, new cigarette lighter, picked up my new KYB front shocks, picked up my new Clifford Alarm system, picked up a new gear reduction starter, ordered a new throttle cable and put a new water inlet valve on my washing machine LOL and that was all after work today. Oh, and I had to bypass the heater core because when I installed the radiator it couldn't handle the new pressure and started leaking on the floor of the cab. Thank god it's hot here in Houston and I don't need het right now! :lol:
desmo1098s
New member
Re: What did you do to your SY/TY today?
Added a quart of synthetic lucas oil additive to try and quieten down my noisy motor......to no avail. I don't have the ability to take heads off and check lifters/rockers so I will just keep driving it and hope for the best even though my knock sensor is freaking out. The Ty will be my DD until 01/10 so I hope she hangs on. It's a shame because I just spent $6000 not even 5 months/3000 miles ago on this built motor(and $14000 on the Ty a few months before that). I would sell my 40,000 mile dream Ty but would lose alot of $$ in this bad market so I will cross my fingers and drive it like a grandma until then and hope for the best. If she blows she blows :rotf:. Anyone in the Sarasota, FL area want to look at it and give me a diagnosis?? This Ty has made me so mad since I have owned it, now it just makes me. I purchased it from a dis-honest seller and got a motor built from a dis-honest builder in NJ......it just wasn't meant to be :nopity:.
Sorry for the rant. Can you believe my Italian bike is leaps and bounds more reliable than my GMC?
Added a quart of synthetic lucas oil additive to try and quieten down my noisy motor......to no avail. I don't have the ability to take heads off and check lifters/rockers so I will just keep driving it and hope for the best even though my knock sensor is freaking out. The Ty will be my DD until 01/10 so I hope she hangs on. It's a shame because I just spent $6000 not even 5 months/3000 miles ago on this built motor(and $14000 on the Ty a few months before that). I would sell my 40,000 mile dream Ty but would lose alot of $$ in this bad market so I will cross my fingers and drive it like a grandma until then and hope for the best. If she blows she blows :rotf:. Anyone in the Sarasota, FL area want to look at it and give me a diagnosis?? This Ty has made me so mad since I have owned it, now it just makes me
. I purchased it from a dis-honest seller and got a motor built from a dis-honest builder in NJ......it just wasn't meant to be :nopity:.Sorry for the rant. Can you believe my Italian bike is leaps and bounds more reliable than my GMC?
Quickstop [UK]
Combating adversyty.
Re: What did you do to your SY/TY today?
connected W2A upgrade intercooler - too tight for the GT45R need options
grounded battery, hung rear exhaust
connected starter/alt to battery and power distribution block
ECM has power, int lights came on, indicators worked (very fast flash), rear brake light was on.
Got the old click from the purple wire syndrome - need to check some fuses.
Planned to throw more money at it tomorrow....new battery and a day of removing electrical gremlins.
connected W2A upgrade intercooler - too tight for the GT45R
need optionsgrounded battery, hung rear exhaust
connected starter/alt to battery and power distribution block
ECM has power, int lights came on, indicators worked (very fast flash), rear brake light was on.
Got the old click from the purple wire syndrome - need to check some fuses.
Planned to throw more money at it tomorrow....new battery and a day of removing electrical gremlins.
The Devils Own Chariot
Active member
Re: What did you do to your SY/TY today?
Soldering some battery cable terminals for my battery relocation.
Soldering some battery cable terminals for my battery relocation.
JKsSyclone
Active member
Re: What did you do to your SY/TY today?
I drove the Sy to work today. Im going to try to do that two or three days a week when the weather is nice.
I drove the Sy to work today. Im going to try to do that two or three days a week when the weather is nice.
sy2206
New member
Re: What did you do to your SY/TY today?
IT RUNS!!!!! I got my new Syclone fired up today for the first time. When I bought it, it was literally 20 below, and I wasn't going to mess with it in the freezing cold. The battery and battery tray were out, and the terminal on the positive battery cable was gone. So I got a new one on there this morn, new battery, and it fired right up.
I'm now making a list of stuff to get for it, so I can clean it up a little and start driving it. It needs a few things to get it ready to go, but then again, I got the truck for free, so I can't complain.
IT RUNS!!!!! I got my new Syclone fired up today for the first time. When I bought it, it was literally 20 below, and I wasn't going to mess with it in the freezing cold. The battery and battery tray were out, and the terminal on the positive battery cable was gone. So I got a new one on there this morn, new battery, and it fired right up.
I'm now making a list of stuff to get for it, so I can clean it up a little and start driving it. It needs a few things to get it ready to go, but then again, I got the truck for free, so I can't complain.
JKsSyclone
Active member
Re: What did you do to your SY/TY today?
We expect to see it at the Nats this year.
IT RUNS!!!!! I got my new Syclone fired up today for the first time. When I bought it, it was literally 20 below, and I wasn't going to mess with it in the freezing cold. The battery and battery tray were out, and the terminal on the positive battery cable was gone. So I got a new one on there this morn, new battery, and it fired right up.
I'm now making a list of stuff to get for it, so I can clean it up a little and start driving it. It needs a few things to get it ready to go, but then again, I got the truck for free, so I can't complain.
We expect to see it at the Nats this year.
Sy-1177
Turbo Inside
Re: What did you do to your SY/TY today?
Awesome Mark! Bring it over Saturday!IT RUNS!!!!! I got my new Syclone fired up today for the first time. When I bought it, it was literally 20 below, and I wasn't going to mess with it in the freezing cold. The battery and battery tray were out, and the terminal on the positive battery cable was gone. So I got a new one on there this morn, new battery, and it fired right up.
I'm now making a list of stuff to get for it, so I can clean it up a little and start driving it. It needs a few things to get it ready to go, but then again, I got the truck for free, so I can't complain.
sy2206
New member
Re: What did you do to your SY/TY today?
Sounds good. I will most definitely be there!
I'm not going to be able to make it on Saturday. I had some other things come up. We'll have to meet up in a couple weeks or so.... Have a BBQ or something....
Sounds good. I will most definitely be there!
I'm not going to be able to make it on Saturday.
I had some other things come up. We'll have to meet up in a couple weeks or so.... Have a BBQ or something....- Status