What did you do to your SY/TY today?
- Thread starter SloGN
- Start date
- Status
mcskibadee1
New member
Re: What did you do to your SY/TY today?
not all today but over the course of this month. I couldnt have done this without all your help
I know, not pretty but I am going to redo it next week.
this went in so easily and perfect, helped more than i thought it would
hard to tell but I added a scoop to help cooling, purchased off ebay
about to wash and wax and will post pics!!
not all today but over the course of this month. I couldnt have done this without all your help
I know, not pretty but I am going to redo it next week.
this went in so easily and perfect, helped more than i thought it would
hard to tell but I added a scoop to help cooling, purchased off ebay
about to wash and wax and will post pics!!
bundie
New member
Re: What did you do to your SY/TY today?
Did you use a regular battery?
not all today but over the course of this month. I couldnt have done this without all your help
Did you use a regular battery?
SYCLONE#1531
'MOFOFAST
Re: What did you do to your SY/TY today?
Glad the scoop worked for ya! you bought it from me!!:tup:
not all today but over the course of this month. I couldnt have done this without all your help
I know, not pretty but I am going to redo it next week.
this went in so easily and perfect, helped more than i thought it would
hard to tell but I added a scoop to help cooling, purchased off ebay
about to wash and wax and will post pics!!
Glad the scoop worked for ya! you bought it from me!!:tup:
BigBadSmoosh
Picking fights on I-65 since 2013
Re: What did you do to your SY/TY today?
Fresh oil change with ZDDP additive, cut off the stock muffler that was completely blown out, gave her a bath and fired her up. Took her for a spin and made 20 psi! Boost doesn't seem steady tho it surges between 12-20psi but still the most boost Ive seen since I bought the truck.
Fresh oil change with ZDDP additive, cut off the stock muffler that was completely blown out, gave her a bath and fired her up. Took her for a spin and made 20 psi! Boost doesn't seem steady tho it surges between 12-20psi but still the most boost Ive seen since I bought the truck.
4C FED
Absolutum Dominium
Re: What did you do to your SY/TY today?
I rescued them from the pile of crap that was covering them. And I added my Brian Green sticker to the back window. Not sure how long I'll leave it on, assuming I ever get it running again. :roll: Thanks Renz for the vinyl.
Before:
After: Still broken, but much cleaner!
And my RenzFab decal...
I rescued them from the pile of crap that was covering them. And I added my Brian Green sticker to the back window. Not sure how long I'll leave it on, assuming I ever get it running again. :roll: Thanks Renz for the vinyl.
Before:
After: Still broken, but much cleaner!
And my RenzFab decal...
Re: What did you do to your SY/TY today?
Digging the sticker, a little smaller and I would get one. Drove it, finally. Ls1 front and rear brakes done, except for e-brake cables. They are coming. Fixed a piece of cladding with 5 min. epoxy. Installed engine tie-down, grill insert finished, chip redone by Hood and washed it. Ran great, handled better with jeep shaft and new ball joints and stopped very well with new brake setup. Really looking forward to getting some miles on it. Bought speed bleeders from Autozone the other day. They were the wrong ones, should have figured. Had to gravity bleed the brakes. Seemed to work well. Was a good day...Jim
Digging the sticker, a little smaller and I would get one. Drove it, finally. Ls1 front and rear brakes done, except for e-brake cables. They are coming. Fixed a piece of cladding with 5 min. epoxy. Installed engine tie-down, grill insert finished, chip redone by Hood and washed it. Ran great, handled better with jeep shaft and new ball joints and stopped very well with new brake setup. Really looking forward to getting some miles on it. Bought speed bleeders from Autozone the other day. They were the wrong ones, should have figured. Had to gravity bleed the brakes. Seemed to work well. Was a good day...Jim
mcskibadee1
New member
Re: What did you do to your SY/TY today?
quick wash and wax
quick wash and wax
WyoSyclone
Active member
Re: What did you do to your SY/TY today?
Took it to the alignment shop this morning...putting in the adjustable trunion 1" lowering blocks in the rear, and a 4-wheel alignment. Also threw in a new set of lower ball joints because the old ones had a tiny bit of slop... first time anyone other than me has worked on it
Took it to the alignment shop this morning...putting in the adjustable trunion 1" lowering blocks in the rear, and a 4-wheel alignment. Also threw in a new set of lower ball joints because the old ones had a tiny bit of slop... first time anyone other than me has worked on it
Fighting5thSVT
Active member
Re: What did you do to your SY/TY today?
I wouldn't mind seeing some "project" pics of before, during and after paint...
I wouldn't mind seeing some "project" pics of before, during and after paint...
RMcCourt
More Miles by Boat
Re: What did you do to your SY/TY today?
Sounds like someone got motivated to work on their truck this weekend.. :tup:
Sounds like someone got motivated to work on their truck this weekend..
:tup:
Fighting5thSVT
Active member
Re: What did you do to your SY/TY today?
Installed my Deltran Battery Tender Jr. It's nice with the quick connect. Just unplug it, tuck the cord and go. No messing with alligator clips or anything. It's sensitive too. You see the charge light start to flash as soon as you open the driver door and the dome light comes on.
[/IMG]
Installed my Deltran Battery Tender Jr. It's nice with the quick connect. Just unplug it, tuck the cord and go. No messing with alligator clips or anything. It's sensitive too. You see the charge light start to flash as soon as you open the driver door and the dome light comes on.
- Status