What did you do to your SY/TY today?

Status
Not open for further replies.

SYCLONE#1531

'MOFOFAST
Re: What did you do to your SY/TY today?

Finished up my A2A install. Currently trying to figure out how and where to mount my battery. Don't want to move it to the bed. Going to step back from the from the battery issue for awhile and try to get the Walbro pump and Racetronix harness in today.

you could possibly mount a braille 15lb battery as I did?
show033.jpg
 

JSM

Active member
Re: What did you do to your SY/TY today?

Drove the black one about 60 miles or so. Glad I don't drive it daily as it would get me in a lot of trouble. Put a huge grin on my face and glad the truck is reliable now. Actually never opened the hood in the past 150 miles or so and not worried.

White ty got brought in for some minor troubleshooting (trans leak, clicky noise in the front) also got the sub box bolted down. Changed the intercooler pump, still need to put fluid back in and test it.
 

aasltmike

Active member
Re: What did you do to your SY/TY today?

Finally finished my dutchty CAC install! :tup: Looks great in there and the instructions were easy to follow to make the mods for it to fit. Pic I took after install:

IMG_1471.jpg
 
Last edited:

roswald21

New member
Re: What did you do to your SY/TY today?

Finally got rid of the euro trash wannabe carbon fiber tail lights for some clear ones ahhh so much better.
 

elorejas

Member
Re: What did you do to your SY/TY today?

i washed mine today, and added the sportmachine vac line kit and want to drop the rear tomorrow
 

92 Ty 1173

Active member
Re: What did you do to your SY/TY today?

Drove the Sy about 30 miles today and then dissassembled the Ty engine some more.
 

fauXGT

Brick Pilot
Re: What did you do to your SY/TY today?

Started out the morning by setting the timing after new MSD dist & hot coil install. Was pushing the upper rradiator hose out of the way. Did'nt notice that the supercharger cog gear was wearing a hole in it.
Ran to the parts store for a new one. Put it in.
Finished the cleanup and went to plug in the distributor bypass wire under the dash. Noticed a funny smelling light green fluid dripping. Tore the lower dash appart. Heater core leaking. Drained the antifreeze for the second time today.
Ran to the parts store for a new one. Put it in.

One step forward...two steps back. :rant:
 

Chest Rockwell

Active member
Re: What did you do to your SY/TY today?

Started out the morning by setting the timing after new MSD dist & hot coil install. Was pushing the upper rradiator hose out of the way. Did'nt notice that the supercharger cog gear was wearing a hole in it.
Ran to the parts store for a new one. Put it in.
Finished the cleanup and went to plug in the distributor bypass wire under the dash. Noticed a funny smelling light green fluid dripping. Tore the lower dash appart. Heater core leaking. Drained the antifreeze for the second time today.
Ran to the parts store for a new one. Put it in.

One step forward...two steps back. :rant:

Ouch, that really sucks Chip. Heater cores are a pain with these trucks, that's for sure. So, blower is in? Can't wait!
 

fauXGT

Brick Pilot
Re: What did you do to your SY/TY today?

Ouch, that really sucks Chip. Heater cores are a pain with these trucks, that's for sure. So, blower is in? Can't wait!

The bracketry is in, so I can get it running to go to paint. Still waiting on the 'backordered' blower.
I am checking everything now before paint.
Last weekend I was checking clearance on the new intake & such. Was trying to relocate an attachment on the master cylinder. Broke the master cylinder.

One step forward...two steps back.
 

gt67sy

Member
Re: What did you do to your SY/TY today?

Picked up my Pontiac intake from Stef's Oil Pans after they welded in all the fuel injector bungs

145e4b65.jpg


adf506e3.jpg


And while I know it's not an AMS1000 I scored a brand new in the box Innovative MSBC-1 for almost nothing.

c91cf20d.jpg


4242c4b7.jpg
 

warmpancakes

New member
Re: What did you do to your SY/TY today?

started polishing the PTE downpipe for the wifes truck, then started thinking i should just ceramic coat it
 

92boosted303

1992 Typhoon #1155
Re: What did you do to your SY/TY today?

Primered and wet sanded the cowl hood shoould be shooting paint in a couple of hours.
 
Status
Not open for further replies.
Top