What did you do to your SyTy today? (part 2)

[randy merritt]

Re: What did you do to your SyTy today? (part 2)

I did some buffing yesterday. I used a dryer sheet by hand on the roof between the rails, and under my DA buffer in the open areas. I used Meguiar's "Ultimate" compound. The dryer sheet really does the trick at removing stains from the roof caused by years of being parked under trees. It turned out pretty good:

 

[Jay92Ty]

Re: What did you do to your SyTy today? (part 2)

Looks Great! A new polish job always makes me feel like I have a new truck again:lol:
good tip on the dryer sheets, never tried that before. thx:tup:

 

[SloGN]

Re: What did you do to your SyTy today? (part 2)

i installed this kick ass skid plate

 

[bdydrpds10]

Re: What did you do to your SyTy today? (part 2)

Just upgrading all the worn out suspension on the front....

 

[Gnocide]

Re: What did you do to your SyTy today? (part 2)

i installed this kick ass skid plate

that is kick ass!!
where??(can i get one)

 

[Sean Krupa]

Re: What did you do to your SyTy today? (part 2)

 

[gringo76]

Re: What did you do to your SyTy today? (part 2)

got new motor and trans in. built long block with vortec heads and 4le60 trans on e85. hopefully get rest of fuel system and lines wrapped up this weekend.

 

[gringo76]

Re: What did you do to your SyTy today? (part 2)

yo sean how was that walbro 450 pump install? did it fit in factory fuel hat, ect? I bought the twin 255 pump system with the wiring system with hobbs switch turning on second pump but never liked the hobbs switch deal.

 

[Sean Krupa]

Re: What did you do to your SyTy today? (part 2)

yo sean how was that walbro 450 pump install? did it fit in factory fuel hat, ect? I bought the twin 255 pump system with the wiring system with hobbs switch turning on second pump but never liked the hobbs switch deal.

The Walbro 450 fit in like a 255 would. Plenty of room still on the stock sending unit.

 

[gringo76]

Re: What did you do to your SyTy today? (part 2)

thanks, Iam leaning towards what you got. I like simple.

 

[gringo76]

Re: What did you do to your SyTy today? (part 2)

got trans lines and cooler ran today. battery cables for rear frame mount battery installed. fuel lines ran to the back. 3 inch rpm down pipe installed. getting there, hopefully by next weekend she will be on her own power again!

 

[SEL777]

Re: What did you do to your SyTy today? (part 2)

Nice work Gringo and Krupa. I hope to post something soon.....been slacking....but about to make some more upgrades.

 

[DC Madman]

Re: What did you do to your SyTy today? (part 2)

Sadly, I think it got its first brake flush.

 

[Static]

Re: What did you do to your SyTy today? (part 2)

Dropped the tcase out due to a major leak and resealed it completely. Also took care of a front pinion seal leak.

 

[2500avalanche]

Re: What did you do to your SyTy today? (part 2)

Dropped the tcase out due to a major leak and resealed it completely. Also took care of a front pinion seal leak.

That is exactly what I am doing right now (just had to purchase another transfercase as my original needs rebuilt)

 

[gringo76]

Re: What did you do to your SyTy today? (part 2)

got fuel pump wired up, trans fan wired up and few other odds, and ends

 

[SEL777]

Re: What did you do to your SyTy today? (part 2)

With Marks help, we got the tank out. Then, I pulled a good portion of the old crusty fuel lines out. New injectors, rail, AFPR, all new custom lines, new tank, 340 lph pump and sending unit going in next.

 

[BstedElky]

Re: What did you do to your SyTy today? (part 2)


Old 7th injector setup

After

 

[gringo76]

Re: What did you do to your SyTy today? (part 2)

Old 7th injector setup

After

wtf? first time I've seen that setup

 

[Mr K]

Re: What did you do to your SyTy today? (part 2)

What is that??