What do I need?

J

jhj

New member
I bought a ECU and chip from a member a while ago. This is what he said about it, "john waller burnt it for me. its for 50lb injectors, 3 bar map, stock turbo. suppose to be a little more aggressive timing and a revised fuel map and idle specs. it will support a full 30psi i believe". I also have done the things in my signature (below). I also have 50lbs injectors and a 3 bar map sensor. Like I said what else do I need? Will this work with my stock o2 sensor or do I HAVE TO UPGRAGE?
I used to have a WRX with a COBB AP unit that worked great with out a expensive tune. Is that possible with our TYs?
Thanks for you input as I know that we always help each other out.
 
Trapper

Trapper

New member
Re: What do I need?

Well first I would think 30psi is out o the stock turbo range and double of what pump gas can support, btu as long as you have the 50s but did he tell you if it was an open program or closed program might be different. you have a 3 bar map so it should work the only 2 ways I can tell you if you have a datamaster showing you its running it alright and the butt dyno telling you its fast.
 
You must log in or register to reply here.
Top