what would it run

Ryda85

Senior Member
just curious what do you guys think a sy would run with these mods:

fp
afpr
intake
exhaust
rpm stage 2 turbo
smc alky kit
3000 stall converter
philip long chip
 

gjp

another post whore
Re: what would it run

Figure the average stock truck is about 13.3-13.5
You added about 50-70hp depending on boost.
Dont show 3 bar or larger injectors?
And its just a guess. I have seen stock turbo trucks 12.9 with that setup.
 

Ryda85

Senior Member
Re: what would it run

i was assuming i didnt have to list every little thing...figured most people knew i needed a 3bar and a boost controller with the chip. i already have to ic mods.

so add 50lbs to the list
 

gjp

another post whore
Re: what would it run

there are r chips out there with stock injectors. IMO 50# injectors with 3 bar would be more important to list then an intake. Still would say mid 12's
 
Last edited:

gjp

another post whore
Re: what would it run

there are just so many things going on to say what it will do. I have seen guys buy 2 of the same cars, do the same things to them and get different results. If you are looking for 11's you will need more for sure. I am hopeing for low 12's with my build. I learned that even will all the engine work, you still need to put the power down. Tires, traction and trans play a key part. My slipping trans made my truk into a high 13 sec. truck real fast. Always thing worse and you will be happy at the track. Expect more and you might be dissapointed.
 

gjp

another post whore
Re: what would it run

seriously...I did not read your first post corectly. You said a Sy, not your Sy. I figured you threw those parts at it and thought you had a 11 second truck. A Sy with those parts given tunning and other support equiptment "can" maybe see high 11's. Stock turbo trucks "can" see 12.3's. I just did not want to say low 12's and have you go to the track for the first time and pull a high 12because the tunning is not there. If you are or have done those mods I guess you have a scan tool and wb02?
The rpm turbos are nice bolt-ons. They look good and add some good usable power. For the price mine woke up my engine and blew out my trans. Now I am going to a 2800 stall I would love the stage 2 or the 60-1 kit.
As far as 8's...He will need the stage 3 for that.LOL
 

Don W.

Stab it and steer it
Re: what would it run

You can see my mods below. Best pass: 13.000 @ 103. It actually makes a better pass -not- launching real hard. Something about the rear tires loosing traction.
rotf.gif
Truck will actually go sideways a bit on a hard launch. Street slicks are in the plans for this year.
 

gjp

another post whore
Re: what would it run

what was your first pass with those mods... To see the difference in "getting to know your truck" makes
 

Don W.

Stab it and steer it
Re: what would it run

I'm kinda Mr inconsistency at the track but in '06 I managed to go from upper mid 13's to low 13's, roughly 1/2 sec difference, learning how to drive the track and the truck all on the same build.
 
Top