Where to buy a 50lb ultimate chip ?

[T-62typhoon]

I've got an ultimate 10n1 chip with 3bar map from stg racing for stock injectors. I upgraded to 50lb injectors and called Mccoy motorsports to see if they could retune the 10n1. Jerry said he could do it for 275. I'd rather buy a whole new 50lb chip setup and use the old stock ultimate on another truck. Where is the best place to purchase a new setup?

 

[denny]

Re: Where to buy a 50lb ultimate chip ?

Contact Micheal Hood, he goes by sytyguy

 

[Luke]

Re: Where to buy a 50lb ultimate chip ?

http://www.turbotime.us/ has the Phil Long chips, pretty sure in stock, give E a shout, great dude

 

[T-62typhoon]

Re: Where to buy a 50lb ultimate chip ?

http://www.turbotime.us/ has the Phil Long chips, pretty sure in stock, give E a shout, great dude

How good are the Phil Long chips, are they similar to the ultimate (using the 3bar map and all).

 

[Luke]

Re: Where to buy a 50lb ultimate chip ?

How good are the Phil Long chips, are they similar to the ultimate (using the 3bar map and all).

good as you'll get with an off the shelf tune (not custom) they have 16 different settings with one being a closed loop (emmissions) setting, there's a good amount of people on the board running them, do some searching and read up

 

[T-62typhoon]

Re: Where to buy a 50lb ultimate chip ?

good as you'll get with an off the shelf tune (not custom) they have 16 different settings with one being a closed loop (emmissions) setting, there's a good amount of people on the board running them, do some searching and read up

Thanks man. I tried calling Turbotime and left a message maybe they'll call back.........

 

[Luke]

Re: Where to buy a 50lb ultimate chip ?

Thanks man. I tried calling Turbotime and left a message maybe they'll call back.........

E is a busy dude, I'm sure he'll get back to you though, might want to send him an e-mail and a pm also, e-rue on the board

 

[T-62typhoon]

Re: Where to buy a 50lb ultimate chip ?

E is a busy dude, I'm sure he'll get back to you though, might want to send him an e-mail and a pm also, e-rue on the board

Ordered the 50lb chip with a 2600 stall converter to boot. Turbotime did a fine job.....
Thanks

 

[Luke]

Re: Where to buy a 50lb ultimate chip ?

Ordered the 50lb chip with a 2600 stall converter to boot. Turbotime did a fine job.....
Thanks

No prob, You think E will send me a free converter for sending him some buisness? :rotf:

 

[T-62typhoon]

Re: Where to buy a 50lb ultimate chip ?

No prob, You think E will send me a free converter for sending him some buisness? :rotf:

He should and thanks for the reference........

 

[denny]

Re: Where to buy a 50lb ultimate chip ?

How much did you spend?
You could have upgrade your STG chip to 50lber for less that $50. :2cents:

 

[T-62typhoon]

Re: Where to buy a 50lb ultimate chip ?

How much did you spend?
You could have upgrade your STG chip to 50lber for less that $50. :2cents:

Converter and all was 860 shipped. I know I could have had the chip reburned, but I've got another Syclone project I can use the stock ultimate on. Thanks for looking out.....

 

[JrTuner]

Re: Where to buy a 50lb ultimate chip ?

How much did you spend?
You could have upgrade your STG chip to 50lber for less that $50. :2cents:

I have a customers STG Ultimate chip that I need upgraded to work with 50 lb/hr injectors. Where can I get this done fairly quickly? Thanks