Where to get a metal turbo - IC pipe.
- Thread starter Bundaho
- Start date
TYPHOOL7
Post Hawk
instead of going throught the hastle of tracking him down why dont you just check and see if a local muffler shop can make you one, it is a pretty simple thing to do.
you need:
1 piece of whatever metal you want let it be ss-stainless steel mandrel bent 90 degrees.
also two pieces of which ever hose you want you can get black, red, blue,, one piece for the turbo side and one for the i/c.
now last but not least the clamps you need four of them thiat is a no brainer
the one thing you need the muffler shop for is to cut the metal and apply some weld to it so the hoses wont slip.
It is pretty easy, it is what i did when i got my blow off vale minus the flange for the BOV, it took me 20 bucks and 1 hour to actually get this done once i had found the metal. you can get it from jeggs i am unsure of the parts # but search for mandrel piping, hoses, clamps and you got it.
Good luck!
you need:
1 piece of whatever metal you want let it be ss-stainless steel mandrel bent 90 degrees.
also two pieces of which ever hose you want you can get black, red, blue,, one piece for the turbo side and one for the i/c.
now last but not least the clamps you need four of them thiat is a no brainer
the one thing you need the muffler shop for is to cut the metal and apply some weld to it so the hoses wont slip.
It is pretty easy, it is what i did when i got my blow off vale minus the flange for the BOV, it took me 20 bucks and 1 hour to actually get this done once i had found the metal. you can get it from jeggs i am unsure of the parts # but search for mandrel piping, hoses, clamps and you got it.
Good luck!
You can actually make two of them out of one of these J-bends, and it will be much cheaper than going to a muffler shop for it.
You can buy them here...
http://www.jegs.com enter *mandrel bends* in product search, then choose Hooker/Dynomax mandrel bends.
They make them in SS, just scroll down.
You will need some good quality rubber hose for the ends of the pipe, so you can attach to the turbo, IC. American Hose & Fittings sells good stuff...
http://www.federalhose.com/silicone.htm
Not the best picture, but it was the only one I could find....note the application :razz:
You can buy them here...
http://www.jegs.com enter *mandrel bends* in product search, then choose Hooker/Dynomax mandrel bends.
They make them in SS, just scroll down.
You will need some good quality rubber hose for the ends of the pipe, so you can attach to the turbo, IC. American Hose & Fittings sells good stuff...
http://www.federalhose.com/silicone.htm
Not the best picture, but it was the only one I could find....note the application :razz:
Here is the link. http://www.syclone.freeserve.co.uk/gp.htm
wannabclone
New member
what size
what size
what sizes should i use
what size
what sizes should i use