Where to get oval - round elbow for TB/A2A

[TYTILIDIE]

Just getting ready to start collecting parts for my A2A and was wondering where you get the elbow that goes from oval to round for the TB to IC piping?

 

[dhorsman2000]

Re: Where to get oval - round elbow for TB/A2A

try Detroit Deisel, they have all sorts of hard and soft turbo piping

 

[jwaller]

Re: Where to get oval - round elbow for TB/A2A

http://www.samcosport.com/
http://www.bakerprecision.com/silicone.htm

http://www.roadraceengineering.com/hoseandclamps.htm

 

[jamnut]

Re: Where to get oval - round elbow for TB/A2A

You may be able to check out some Fbody forums & get one used, Vortech makes them for the LT1's.

 

[SyTyJedi]

Re: Where to get oval - round elbow for TB/A2A

RPM has one that they offer with their A2A kit. Mike may be selling it seperately.

That reminds me, I need to figure out what parts of my A2A i'm going to keep and sell the rest...

 

[syclone1100]

Re: Where to get oval - round elbow for TB/A2A

dont get the ls1 TB intake its rubber and it ballons up and will eventuall break and blow off...

 

[TYTILIDIE]

Re: Where to get oval - round elbow for TB/A2A

dont get the ls1 TB intake its rubber and it ballons up and will eventuall break and blow off...

LS1's have a round opening and ours is circular. But thanks for the info everyone.

 

[HotRodV6]

Re: Where to get oval - round elbow for TB/A2A

Here you go, these are all aluminum, and work pretty well.

http://store.summitracing.com/egnsearch.asp?N=4294925239+4294813803+4294852064+4294908216+115+4294852061#rstop

 

[syclone1100]

Re: Where to get oval - round elbow for TB/A2A

LS1's have a round opening and ours is circular. But thanks for the info everyone.

I meant the LT1 sorry

 

[Jer]

Re: Where to get oval - round elbow for TB/A2A

All you need is an aluminum LT1 elbow and ur set.

 

[typhoon92]

Re: Where to get oval - round elbow for TB/A2A

Just getting ready to start collecting parts for my A2A and was wondering where you get the elbow that goes from oval to round for the TB to IC piping?

Did you ever find the oval to round piping or silicone hose to use?

 

[jbone]

Re: Where to get oval - round elbow for TB/A2A

LS1's have a round opening and ours is circular. But thanks for the info everyone.

LOL I thought round and circular were the same thing :rotf:

 

[crazy151drinker]

Re: Where to get oval - round elbow for TB/A2A

For our vacuum hoses do we use the 6mm or 8mm??
http://www.bakerprecision.com/hosetech.htm
Sure is alot cheaper than the crap ive been buying at autozone (looks alot better to).

 

[Flyin Ryan]

Re: Where to get oval - round elbow for TB/A2A

For our vacuum hoses do we use the 6mm or 8mm??
http://www.bakerprecision.com/hosetech.htm
Sure is alot cheaper than the crap ive been buying at autozone (looks alot better to).

I picked up some 4mm and 6mm red vac lines from Baker like a year or so ago which I redid my entire vac setup with and they were really nice.. thick as hell to and are real colorful when cleaned

 

[juicehead9]

Re: Where to get oval - round elbow for TB/A2A

Trick Flow LT1 air inlet elbows the ovel part is 4 inch what is the round part size ie... 3inch 4 inch.

 

[RSpengler]

Re: Where to get oval - round elbow for TB/A2A

Whats the problem with running a 4"-3" silicone reducer? The 4" part should squeeze down to oval and leave the 3" portion circular... Thats what I plan to do?.?.?
-Rob

 

[vortecfiero]

Re: Where to get oval - round elbow for TB/A2A

I was messing around and made one out of aluminized and out of stainless
the cutting was easy... the welding.. well ... lol Im still learning

 

[Robert Lone]

Re: Where to get oval - round elbow for TB/A2A

Those look familiar. That's one of the pics from the Summit pages referred to earlier in this thread.

 

[RSpengler]

Re: Where to get oval - round elbow for TB/A2A

My plan has failed. When you squeeze the 4" down to oval, the 3" portion ovals out so much that you cant get a round pipe in there... Damnit. Now I have to fabricate something fancy... The rest of my A/A IC setup is lookin pretty OG though... pics forthcoming.
-Rob

 

[JSM]

Re: Where to get oval - round elbow for TB/A2A

My plan has failed. When you squeeze the 4" down to oval, the 3" portion ovals out so much that you cant get a round pipe in there... Damnit. Now I have to fabricate something fancy... The rest of my A/A IC setup is lookin pretty OG though... pics forthcoming.
-Rob

Not sure what one you got, but I have a 3" to 4" coupler here that worked fine. I know some of the rpm intercooler kits came that way also.