WTB 12 bolt set up for Syclone

[FastBlackTA]

I figured I would post this up as I'm building a truck now and need a 12 bolt or 9 inch but I think there is no 3.42 gear for a 9 inch if I recall correctly.

If you have a setup out of a Syclone that's a direct fit please PM me. I am located in Maryland. If I can't find one I will end up going the new route from Moser.

 

[FastBlackTA]

Re: WTB 12 bolt set up for Syclone

To the top

 

[D. Sea]

Re: WTB 12 bolt set up for Syclone

Over this winter I'm going to build the 8.5 10 bolt in my brothers camaro. 33 spline Spool and C-Clip Elimnator axle package from Moser with the matching cover/brace.

Could you not do the same with the factory rear?

 

[FastBlackTA]

Re: WTB 12 bolt set up for Syclone

I don't think it would be up to the task.

 

[autoaddictions]

Re: WTB 12 bolt set up for Syclone

You will have to go 12 bolt or get a 10.5 like form a 90s impala ss and narrow 2 inches and install better axels weld up leaf pads and 3.42 gears. There is no easy solution. There's only a hand full of trucks fast enough to need any thing better than a stocker. There for non laying around un used to get on the cheap. You can order a bolt in from strange or Carrie. Moser too. But expect to spend 3000.

 

[mattw]

Re: WTB 12 bolt set up for Syclone

Narrow 2 inches

A lot of guys run 1" spacers on either side with aftermarket rims. Seems like this rear would be a great option to eliminate those spacers and provide a stronger solution if it is in fact 2" wider than stock..


-Matt

 

[autoaddictions]

Re: WTB 12 bolt set up for Syclone

A lot of guys run 1" spacers on either side with aftermarket rims. Seems like this rear would be a great option to eliminate those spacers and provide a stronger solution if it is in fact 2" wider than stock..


-Matt

that's what I did. U just cant ever run the stock wheels again. have to change axels too impalas are 5x100 bolt circle.

 

[FastBlackTA]

Re: WTB 12 bolt set up for Syclone

I would really want to run the syclone wheels and have the option to run the black grand sport wheels as well.

 

[Norm]

Re: WTB 12 bolt set up for Syclone

I would really want to run the syclone wheels and have the option to run the black grand sport wheels as well.

There should be enough room on the flange to get them redrilled to a 5 on 4 3/4 bolt pattern.

 

[FastBlackTA]

Re: WTB 12 bolt set up for Syclone

I'm not certain a 10 bolt deal would work with 1000 hp plus.

 

[RealFastV6]

Frank 4 fronts should be about right.

 

[autoaddictions]

Re: WTB 12 bolt set up for Syclone

Ed Hess ran his twin turbo with the impala rear. No problems. Trans brake turbo 400.

 

[FastBlackTA]

Re: WTB 12 bolt set up for Syclone

Was it a spool or a limited slip? I am looking to run a limited slip or locker as it's a street strip deal.

Btw that is a badass typhoon!

 

[FastBlackTA]

Re: WTB 12 bolt set up for Syclone

Making one last attempt to see if somebody has a 12 bolt for sale before I buy a new one.....I know it's a shot in the dark but just checking in...