Bunch of stuff cheap!!!! More parts added 10/11

Injected1

Member
All parts are in Rubbermaid Tubs in a storage unit down the street from my house. I haven't looked at them in a while. If you're interested in anything - post here what part you're interested in and I'll check it out & get back to you ASAP with more info or a picture. Buyer pays price + shipping + 3% Paypal.

All parts worked when removed 1 year ago. Removed from not so clean vehicles so almost all parts will need some clean up however that is why they are so cheap, I need to empty out my storage unit.
Walbro 255 never installed-80
Aeretor500 ic pump-40
Autometer ultralite boost gauge 30
Kennybell fiberglass air box w/ K&N-75
Fresh set l35 heads, fresh from machine shop, lite surface rust.---$110
Coil X2 --$20
Upper & Lower fan shroud- L-60 & Upper--50 small crack on top no missing pieces
2 bar map 20
power str. pump with hoses 60
2 stock turbos 1 great cond---185-1 ok cond 150
batt tray 20
oil collant lines to rad-25
front gas straps 2-60ea
rear gas strap- 50
six full turbo feed an drain oil coolant 20 ea
ac lines-35
cruise control 35 ugly-60 like new
TB IC coupling PAS x2--20 ea
Stock dp with cat- 110
radiator upper and lower hoses----x6--20 ea
Ac compressor-75 like new
Throttle body- 80
pow str pump bracket- 15
Gas tank protect shield--30
Abs wire harnes front to rear--50
stock sy diff output flange-25
Stock fan painted red--30
Acc. brackets powder coated hyper silver--100 both

Box 1:
1) Lower radiator hose.--15
2) Cobra Elbow x2 -20 ea
3) EGR Solenoid-10
4) Pulleys stock 10 ea
5)
6) Turbo coolant lines (feed & return)-25ea
7) Radiator overflow-10
8) Lower parking light-5
9) Turbo oil feed line-25
10)
11)
12) Steering shaft-10
13) Waste gate-10
14) Alternator-25
15) Accessory pulley-10
16) Accessory brackets-15ea
17) Thermostat gasket-2.50
18) Stock Syclone drive shaft
19) Stock Typhoon drive shaft-60
20) Front fan-25
21) Water pump-10
22) 1 Stock prop shafts-75
23)

Box 2;
1)
2) Braided turbo feed line-25
3) Gas tank filler neck-10
4) Power steering pump w/ hoses-15
5) Battery hold down-10
6) 2 bar map sensor-15
7) Washer fluid res.-15
8)
9) Alternator-25
10)
11) Boost Solenoid-15
12) New fuel filter-10
13) Door vent-10
14)
15)
16) Gas cap-15
17) Injector-15 each
18)


Box 3;
1 & 2) Distributors-20
3) Steering shaft-20
4,5,&6) OH-SHIT handles-5 ea 10 for both
7)
8 & 9) Fuel rails-20 for one no regulator mount 40 for like new
10
11)
12) Air/Heat controls-20
13) Head & tail light controls-25
14) Cruise control- 10 ea x2
15) Alternator bracket-25
16) Throttle body-20
17) Metal turbo line-25
18)
19)
20 & 21) A/C compressors w/ brackets- 75
22) Waste gate-10
23)


Box 4;
1) Typhoon wiring harness-200
2)
3) Oil dipstick-10
4) Metal turbo coolant line-25
5)
6) Coolant return line-25
7) Cruise control-10
8)
9)
10)
11)
12)
13)


Package 5;
1 & 2) Stock turbos-1 left -150
3)
4) Power steering cooler-15
5)
6 & 7)
8 & 9) Head gaskets (still in package)- 40
10)
11) 6 Lunati rods-80 sb chevy
12)
13)
14)
15)
16)
17) Kenny Bell "Boost-A-Pump"-90 just pump and mount
18)
19)
20) Hood rod prop-15
21) Taylor plugs wires- 30 2 weeks use black
22)
23) Stock lower heat exchanger 35


Package 6;
1) 2 Corner lights-15 pr
2) Flex plate-25 fresh black powder coat
3 & 4) air boxes- 20 w/o K&N 30 W/
5 & 6) TC inspection plates-15 ea
7) Distributor cap-15
8) Stock FPR-20
9) Pulley-10
10) Inter cooler cover-10
11) Misc upper motor brackets-10 ea
12) Washer fluid res.-15
13) Map pocket & arm rest for Typhoon-20 ea
14) Typhoon over head console-30
15) PAS orange elbow-25
16) Throttle cable

$ 2000 ---Sy rolling chassis in good shape, title will be here, nov 25th. perfect int. Needs bed or body work, have repair panels, new front clip minus hood, freshly sandblasted, chassis savered, red polyurethane frame. factory straight good condition wheels. Comes with light intermittent knocking motor due to overboost and a perfect sludgy longblock with np problems, removed due to sludge

Ty rolling chasis - no interior & no motor - has stock fuel system, wire harness, 4 stock wheels painted black, front & rear differentials as well as stock suspension, rear bumper and support $550 = SOLD (great base for pro-street Ty)

Ty trans and transfer case and torque conv. needs governor worked great 1 year ago-650
thanks
 
Last edited:

Norm

Donating Member
Re: Bunch of stuff cheap!!!!

Re: Bunch of stuff cheap!!!!

How clean(good) is the Box 4- item#1 wiring harness? Any cuts splices etc, also how good is the front propshaft, anything torn/worn?
 

Sportmachines

Active member
Re: Bunch of stuff cheap!!!!

Re: Bunch of stuff cheap!!!!

I might take "17) Kenny Bell "Boost-A-Pump"-90 just pump and mount" pending pics
 

Injected1

Member
Re: Bunch of stuff cheap!!!!

Re: Bunch of stuff cheap!!!!

I might take "17) Kenny Bell "Boost-A-Pump"-90 just pump and mount" pending pics

Danny the pump is brand new. Notice that I didn't post any of the cladding. Saving it for our deal that we will work out soon sorry it's taken so long but for now I know I am going to need 2 front fender claddings. but you will get about 5 in return.
 

Injected1

Member
Re: Bunch of stuff cheap!!!!

Re: Bunch of stuff cheap!!!!

How clean(good) is the Box 4- item#1 wiring harness? Any cuts splices etc, also how good is the front propshaft, anything torn/worn?

It's still on the ty but I will remove it. I remmeber correctly I don't believe I cut anything but definitely not clean. The front shaft is a bit worn and needs a boot I believe
 

Norm

Donating Member
Re: Bunch of stuff cheap!!!!

Re: Bunch of stuff cheap!!!!

clean it I can do, let me know on the condition of it, probably will pass on the prop if it's torn.
 

SLOW12S

New member
Re: Bunch of stuff cheap!!!!

Re: Bunch of stuff cheap!!!!

The ty wireing harness ill take it (nonusa6@sbcglobal.net) Kym
 

Injected1

Member
Re: Bunch of stuff cheap!!!!

Re: Bunch of stuff cheap!!!!

i have to hold off on selling it to see if anyone wants the whole ty. Same to you Norm
 

Richard Le

New member
Re: Bunch of stuff cheap!!!!

Re: Bunch of stuff cheap!!!!

It's basically a small bracket that attaches to the front two studs on the passengers side of the lower intake and another smaller bracket with a 90-deg bend that attaches to it with a single bolt. I also need a bracket that attaches to the front two studs on the drivers side of the lower intake.
 
Top