Search results

Anyone know where I can get another one of these? Anything that works as a replacement what size are the threads ect. I searched but don't have much time at the moment to read through a ton of post so fig I would just ask. Thanks for any help.

Need valve covers that will fit over my rocker arms ect for vortec heads. I have tried and the stockers ofcourse do not fit which I guessed that would be the case lol.

Anyone here try using a Ice box setup with the intercooler. http://www.ebay.com/itm/CXRacing-4Gal-Ice-Box-Tank-23-5-Heat-Exchanger-Water-Air-Intercooler-Pump-/390593280398?_trksid=p2054897.l4276 This one comes with the ice box, exchanger and air to air, Just wondering if you could use it and...

Couldn't find the a seller feedback section so I am posting it here. Mods feel free to move to correct location. I bought a non- a/c box from atkonkler and he shipped it right away, packaged it better then some high end parts I have got from others and was great to deal with. I would buy from...

Well just so happens I picked up a lsx376 crate engine for pretty much free. I helped a buddy build his shop and he needed a a/c unit for it and I had one lying around so he said I could have the crate engine for the a/c unit( industrial type not your reg window unit lol). So I made the trade...

Might be a stupid question but will the stock manifolds bolt onto vortec heads, only reason I am asking is because the vortecs I have dont seem to want to line up with my stock manifold mounting holes. Maybe i am doing somehting wrong but not sure. I did a search but didn't see anything about...

Well i mailed a set of vortech heads to RPM to get drilled for the syty intake and ( My fault ) I did not package them good enough and they were damaged, I am not sure if they still can be used or not since the damage is on the inside part of were the o-rings would go but I will let some of you...

Got a engine block here need to verifiy where it came from. It's a gm 4.3 with the following numbers 10105867, c318, 887n1, 3 SG1 thanks for any help you guys can give. Been searching but only tells me its a chevy lol. I get the manf date ect just trying to see where the block came from.

Just wanted to say thanks for helping me out with my intake for the vortec heads ect. Sorry I didn't post sooner but due to a recent injury I didn't have time to get online. Just wanted to let you know the intake looks great/welds and all and should work out real nice with the new build on my...

Looking to get my stock intake modified for my vortec heads and was wondering if rpm is the only place to get them done. They charge 275 for just the machine work, no porting or gasket matching. 475 with porting. Just seeing what else is out there. If not then I will be sending the intake...

I got a pm from this retard today and not if sure whats it's about( think it is from a thread last week or something) but for your enjoyment this is the pm i recieved and ofcourse my response back to him. Re: meet up...

Well since I have the motor out of the sy while we build it I fig now is a good time to repaint the truck. I cant decide if I want to keep it black or a different color. I was thinking about painting it cyclone grey metalic which is what color my 9 sec gto was. Its a great color and does not...

Well My 9 second gto is now sold and awaiting bank to clear check. I will now be starting on my syclone build. I will be using a stock block with some work done to it- bored, 4 bolt mains ect. Does anyone know of stroker cranks for our trucks that dont cost $3500 fing dollars. I will be buying...

Well I was working on my sy fixing the front diff and getting ready for the coil over and decided to pull the oil pan. Once I did and check some part number and pics and found that the previous owner had the bottom end rebuilt with srp pistons and eagle rods. All bolts are arp but looks like a...

Anyone know if I can swap the gauge cluster from a 92 bravada into the syclone? I picked up a bravada for parts and I like the bravada gauge cluster. Its all digital/ no needles so I am not sure if it will just swap over or not. And I don't need the factory boost gauge since i have a aftermarket...

Trying to find new front axels or at least the pass side axel shaft not the cv axels. I pulled my front diff and found that the drive spider gear was broke and the splines on the axel were grounded down. I can't find a new one and need help. this is the part...

Was wondering if while I am pulling the front diff to put my new one in would it be easier to just pull everything for the coil over swap while I am at it and would that make taking the diff out easier. Any help from the long term syty guys would be great.

Ok so I have read searched ect. and am trying to find the best/ easiest way to test your transfer case to see if its good. Basically my truck is only rwd due to a unknown prob with either the tc or the front diff area. Ok so idk if this is a good test for the tc or not but bere is what I did...

Anyone know where I can get a new dash for my syclone. When I baught mine it already had a crack in the dash and I want to get that replaced when I have the truck repainted.

What are the part numbers for the syclone TC. I am trying to buy a new one but dont know which one is for the syclone. I know the ty;s have a different part number/ model number then the syclones but not sure which one is which. I think one is 27 spline and the other is 32 but not sure.