#0213 typhoon renew

[Adam#0213]

Getting truck ready for paint shop.Just getting some of the cladding off today.Will be repairing cladding on the back side.Here are some pictures will try to update pictures during the renew on my ty.
IMG]http://pic20.picturetrail.com/VOL253/13548542/24249191/405353117.jpg[/IMG]

 

[Logan]

Re: #0213 typhoon renew

Another one going under the knife, I like it!

 

[sycho]

Re: #0213 typhoon renew

Dosent look that bad? I love factory chrome wheels!

 

[Adam#0213]

Re: #0213 typhoon renew

Had WCI do the chrome plating on the rims.I like the factory rims.I could have had the clear coat redone but decided to chrome them.

 

[Gnocide]

Re: #0213 typhoon renew

this looks really familiar--good luck take your time on the cladding

 

[TyFun]

Re: #0213 typhoon renew

Love the wheels!

 

[Gnocide]

Re: #0213 typhoon renew

Love the wheels!

always loved the wheels - more so in chrome
its the trucks identity

 

[Adam#0213]

Re: #0213 typhoon renew

Got cladding off last night.That was a fun thing to do.Had a few broking tabs and a few cracks.

 

[Adam#0213]

Re: #0213 typhoon renew

Here is a update on the cladding was able to repair and prep cladding yesterday.Wow what a lot of prep work on the cladding.During the week had hand washed pieces so tabs wouldn't futher break off only had two break off while cleaning.Used SEM 40507 to secure tabs good stuff to use sets up in fifty seconds cures in five mins says on bottle for tabs and bumpers.

She is a dirty girl!!!!

 

[Adam#0213]

Re: #0213 typhoon renew

Here is a update on the truck been working on the cladding just about done.It will be going into the paint shop in about two weeks.

 

[GMPartsGuy]

Re: #0213 typhoon renew

That truck looks familiar......VERY familiar........

 

[Turbotoyz]

Re: #0213 typhoon renew

Those wheels look horrible!!! I wouldn't leave them on that truck. You should sell them to me.

 

[Adam#0213]

Re: #0213 typhoon renew

Those wheels look horrible!!! I wouldn't leave them on that truck. You should sell them to me.

:rotf::rotf:thats a good one.

 

[SEL777]

Re: #0213 typhoon renew

pix don't look like it needed paint, good work on da cladding.

 

[Adam#0213]

Re: #0213 typhoon renew

It has been a long two weeks truck going in tomorrow..Dropping the cladding off first thing in the morning to my painter.I will be dropping truck off on saturday.Pulled off the bumpers and wheel wells to primer and repaint myself turned out pretty good.Been super busy with getting stuff done on the truck.

 

[Adam#0213]

Re: #0213 typhoon renew

Hey Gnocide here are the pictures of the hood hinge seals one on left is GM other side LMC.Seem to be ok.You can't order up the right side up any more from GM.But LMC does a good job as far as OEM for the seal.

 

[Gnocide]

Re: #0213 typhoon renew

is there i physical difference in size?

pic looks like gm is bigger.

 

[Adam#0213]

Re: #0213 typhoon renew

The second picture was not that good sorry about that .No the size seems to be pretty close to the GM one .The LMC maybe 1/16" of a inche from top to bottom off not enough to worry about no one could spot the aftermarket one anyways..

 

[Adam#0213]

Re: #0213 typhoon renew

Just got my seats back this last week had all the panels {trim pieces}redone around the seat and the backs.Have not put the seats back together yet. For the color of the cloth tryed match to the factory color.Had to repair one leather panel on the passage side.The guy that did the work was Richard Redmond 3530 SW multnomah blvd Portland OR 97219 phone #503 997-9596.He does great work.

Here is a picture of my son helping me take pictures.

 

[Gnocide]

Re: #0213 typhoon renew

seats look good!