For those who wanted them, a few pics of my Typhoon (56k die!)
- Thread starter Jer
- Start date
MotorMouth
Member
Re: For those who wanted them, a few pics of my Typhoon (56k die!)
*Stock block bored .030 over & all oil passsages/drain ports were debured and smoothed out.
*Stock crank turned down .010 on the mains and .020 on the rods & micro polished.
*New L35 rods shot peened (sp?) for stress relief & machined to accept the Speed Pro floating pins.
*L35 heads slightly worked on the intake side and machined for larger springs.
*Ported stock intake
*Comp Cams springs
*GMPP billet steel 2 bolt main caps
*Z28 oil pump with welded pick-up
*Comp Cams double roller timing chain
*Speed Pro .030 over pistons with coated skirts
*Speed Pro rings
*GMPP 1.6 self alighn roller rockers
*ARP head studs
*ARP main studs
*GM head gaskets
*Stock cam
*Comp Cams push rods
*Edlbrock aluminum water pump
*Custom alternator bracket tensioner for a/c bracket removal (made by me)
*Custom 3" down pipe with external wastegate (made by me)
*B&M flex plate
*Turbo is a T3/T4 hybrid, 57 trim compresor wheel w/.60 a/r housing and a Turbonetics Stage V compressor wheel with a 5 bolt Turbonetics .63 a/r housing.
Figured I would chime in, here is the bread and butter list for the motors goodies, I know Jeremy has made some external changes since owning the truck.wicked said:
*Stock block bored .030 over & all oil passsages/drain ports were debured and smoothed out.
*Stock crank turned down .010 on the mains and .020 on the rods & micro polished.
*New L35 rods shot peened (sp?) for stress relief & machined to accept the Speed Pro floating pins.
*L35 heads slightly worked on the intake side and machined for larger springs.
*Ported stock intake
*Comp Cams springs
*GMPP billet steel 2 bolt main caps
*Z28 oil pump with welded pick-up
*Comp Cams double roller timing chain
*Speed Pro .030 over pistons with coated skirts
*Speed Pro rings
*GMPP 1.6 self alighn roller rockers
*ARP head studs
*ARP main studs
*GM head gaskets
*Stock cam
*Comp Cams push rods
*Edlbrock aluminum water pump
*Custom alternator bracket tensioner for a/c bracket removal (made by me)
*Custom 3" down pipe with external wastegate (made by me)
*B&M flex plate
*Turbo is a T3/T4 hybrid, 57 trim compresor wheel w/.60 a/r housing and a Turbonetics Stage V compressor wheel with a 5 bolt Turbonetics .63 a/r housing.
Last edited:
typhooey
New member
Re: For those who wanted them, a few pics of my Typhoon (56k die!)
IF ITS THE LOWER DOOR EMBLEMS YOUR LOOKIN FOR THERE ON EBAY RIGHT NOW FOR SALE.Jer said:Yeah, I realized I took the measurements wrong when I was putting them on and they're up too high. If you search around you'll see that I've been trying to find another pair of door emblems to redo them.
As for the GMC letters, I have some but actually like the all black look. The mounting holes look like rivets or something manly like that. The monochromatic look with the huge FMIC behind it looks good to me. You don't like it? Buy it from me and put them on.j/k
MotorMouth
Member
Re: For those who wanted them, a few pics of my Typhoon (56k die!)
You mean the black upper?NeedaSY said:
MotorMouth
Member
Re: For those who wanted them, a few pics of my Typhoon (56k die!)
, sad that I had most of that memorized
WelcomeJer said:Thanks for fielding that one.
, sad that I had most of that memorized
MotorMouth
Member
Re: For those who wanted them, a few pics of my Typhoon (56k die!)
Just brain cells I'll never get backJer said:
MotorMouth
Member
Re: For those who wanted them, a few pics of my Typhoon (56k die!)
No part number, it is fabbed out of exhaust pipe, 3".NeedaSY said:
six_wheeler
New member
Re: For those who wanted them, a few pics of my Typhoon (56k die!)
Amazing! My truck is a long way from being this clean (at least for now).
Why did you do away with the IC?
Shady
Amazing! My truck is a long way from being this clean (at least for now).
Why did you do away with the IC?
Shady
MotorMouth
Member
Re: For those who wanted them, a few pics of my Typhoon (56k die!)
Correct, it is the Vortech elbow for an LT1chelo said: