LS1 Ebrake kits...New GP

[BigBadSmoosh]

Re: LS1 Ebrake kits...New GP

sucks that even if he does come through with all of the parts for those that ordered, his rep is shot in my eyes, I know I won't be ordering anything from hotrodv6

 

[alwayscode390]

Re: LS1 Ebrake kits...New GP

well, that may be true.... but DONT mess it up for us ---

 

[BigBadSmoosh]

Re: LS1 Ebrake kits...New GP

well, that may be true.... but DONT mess it up for us ---

getting you guys your parts is the only chance he has of ever selling anything again.

 

[alwayscode390]

Re: LS1 Ebrake kits...New GP

Very true, I was just kidding with my last comment ---

 

[George Blake]

Re: LS1 Ebrake kits...New GP

Where's the pile of brackets? The timeframe that these cables came in suggests that pressure made him follow through. He has sold quite a bit of stuff over on the Houston board. Hopefully he's getting the hint...maybe. He still has to do the brackets. I don't see those. The only brackets so far was the prototype he sold to someone. A picture of cables on a chair doesn't fill the orders. You still need brackets. Those are gonna take a day to water jet if you have the design DONE as you suggest.

 

[Daryl H]

Re: LS1 Ebrake kits...New GP

... and then will be off to the powdercoater, and by then i will have the springs installed and the brackets back and will get everything shipped...[/img]

Good thing we waited till the cables got there to send them off to get powdercoated.

Another two weeks pass.

 

[Daryl H]

Re: LS1 Ebrake kits...New GP

HotRodV6 has officially had my money for 200 days.
Time flys when you wait two weeks at a time.

 

[George Blake]

Re: LS1 Ebrake kits...New GP

Hopefully he will start working on the brackets one day. He may have to sell more stuff to pay for it since the money was spent on the frame off he did.

HotRodV6 has officially had my money for 200 days.
Time flys when you wait two weeks at a time.

 

[djwaggoner]

Re: LS1 Ebrake kits...New GP

Just for the record, the "prototype" I received was allegedly made by Jorgensen, and I found that it wouldn't fit the Ty axle bolts even though the holes had been elongated to the point that there was minimal material left at the edge....I returned them as defective and still demand a return of my $110.
I don't believe that any brackets have been fabricated to date - the story was that the cables were the holdup, and that excuse didn't cover my order for brackets alone.
If he had them made up awaiting cables, it wouldn't have been necessary to send someone else's product.

 

[HotRodV6]

Re: LS1 Ebrake kits...New GP

Just for the record, the "prototype" I received was allegedly made by Jorgensen, and I found that it wouldn't fit the Ty axle bolts even though the holes had been elongated to the point that there was minimal material left at the edge....I returned them as defective and still demand a return of my $110.
I don't believe that any brackets have been fabricated to date - the story was that the cables were the holdup, and that excuse didn't cover my order for brackets alone.
If he had them made up awaiting cables, it wouldn't have been necessary to send someone else's product.

well to furthur clear the record, i told you once i got the brackets back i would give you your money back, but as of today i have yet to recieve the brackets.

 

[ty166]

Re: LS1 Ebrake kits...New GP

hey djwagoneer , just ship him the brackets back, he seems like a stand up guy im sure he'll mail you a refund right away......:rotf::rotf:

 

[Loeryder]

Re: LS1 Ebrake kits...New GP

Has anything been shipped on this GP yet?

The cables have been delivered for 10+ days now but yet nothing has been shipped?

 

[Daryl H]

Re: LS1 Ebrake kits...New GP

Has anything been shipped on this GP yet?

The cables have been delivered for 10+ days now but yet nothing has been shipped?

Everything is done in two week increments.
We have to ask again on the 14th day.

 

[jjorgensen52]

Re: LS1 Ebrake kits...New GP

Just for the record, the "prototype" I received was allegedly made by Jorgensen, and I found that it wouldn't fit the Ty axle bolts even though the holes had been elongated to the point that there was minimal material left at the edge....I returned them as defective and still demand a return of my $110.
I don't believe that any brackets have been fabricated to date - the story was that the cables were the holdup, and that excuse didn't cover my order for brackets alone.
If he had them made up awaiting cables, it wouldn't have been necessary to send someone else's product.

Once again, I'll state to go with this that I did not sell any complete brackets to HotRodV6 except for one that was a prototype jig, which was not drilled for mounting nor was ever intended to be.

 

[HotRodV6]

Re: LS1 Ebrake kits...New GP

Once again, I'll state to go with this that I did not sell any complete brackets to HotRodV6 except for one that was a prototype jig, which was not drilled for mounting nor was ever intended to be.

no but i bought a kit from you back when you started the whole thing, and the brackets i got from you on that deal were the ones i sent.

 

[George Blake]

Re: LS1 Ebrake kits...New GP

This looks like done deal. Now he's trying to make it look like J is responsible for the bad brackets.

 

[alwayscode390]

Re: LS1 Ebrake kits...New GP

I WANT SOME PARTS DAMMIT. Send me the cables, THEN the brackets if you have to. Its too hard to trust you otherwise. The only reason I am hanging off on calling the cops, is the fact that you still reply after all the flaming!!! PROVE US WRONG, and MAKE YOUR DEAL RIGHT!!!

I wanted to drive my GOD DAMN TRUCK this summer, but my suspension is still apart WAITING FOR THESE PARTS !!! ---

 

[jjorgensen52]

Re: LS1 Ebrake kits...New GP

ust for the record, the "prototype" I received was allegedly made by Jorgensen, and I found that it wouldn't fit the Ty axle bolts even though the holes had been elongated to the point that there was minimal material left at the edge....I returned them as defective and still demand a return of my $110.

no but i bought a kit from you back when you started the whole thing, and the brackets i got from you on that deal were the ones i sent.

Curious how that could be. None of the kits I sold (repeat, NONE) would not fit. Every last one of them was test fitted on my Typhoon before I shipped it to ensure they would function as I had stated in my GP. I had no complaints about that, so I guess it's pretty cool to be getting them from a third party.

If the brackets wouldn't fit or weren't within spec, why didn't you return them to me for a replacement / refund instead of reselling them to someone else? (also for the record, these brackets would have been sold almost 1.5 years ago now, as I have been at school and unable to manufacture them since April of 2006)

 

[MikeRenz]

Re: LS1 Ebrake kits...New GP

Curious how that could be. None of the kits I sold (repeat, NONE) would not fit. Every last one of them was test fitted on my Typhoon before I shipped it to ensure they would function as I had stated in my GP. I had no complaints about that, so I guess it's pretty cool to be getting them from a third party.

If the brackets wouldn't fit or weren't within spec, why didn't you return them to me for a replacement / refund instead of reselling them to someone else? (also for the record, these brackets would have been sold almost 1.5 years ago now, as I have been at school and unable to manufacture them since April of 2006)

don't worry jjorgy...we know the brackets you made were fine and the main thing you can't do is etch the "typhoon" logo on intercoolers. :lol:

 

[jjorgensen52]

Re: LS1 Ebrake kits...New GP

don't worry jjorgy...we know the brackets you made were fine and the main thing you can't do is etch the "typhoon" logo on intercoolers. :lol:

We'd need a new thread for that one :roll: :rotf: