New Member - Raleigh NC

[robertmee]

Hi all...New member in Raleigh, although I've owned my Syclone for a couple of years. #1772. Also an owner of a GN, so you may have seen me on the TB forums.

The SY was built out by the previous owner w/ a .030 RPM Engine, GT66 turbo, 60# injectors, hardened Transmission, c5 brakes, caltrac battle bars, PLX wideband with a TT chip. Plus tons of other performance enhancements. Runs low 11's at 18psi of boost.

Lately, seem to be picking up some A/F anomalies and possible missing that I have to diagnose, so if there are any Sy/Ty experts nearby, would love some help. I have a full garage w/ lift that any of my Sy/Ty or GN brethren are welcome to use. As long as you clean up after yourself and replace any tools you break

 

[graham1524]

Re: New Member - Raleigh NC

Welcome, there are a few of us around the area! Check the southeast forum for a get together that I'm putting together for mid April

 

[Vaders Sy]

Re: New Member - Raleigh NC

Welcome! Tons of knowledge on here at your disposal.

 

[64impala]

Re: New Member - Raleigh NC

Welcome I am in the Raleigh area actually in Clayton but close enough. Can't make the spring meet up but I'm sure a few of us local guys could meet up sometime. Maybe at a grill57 or chargrill cruise in or something. I'll be taking the six-4 out to those too.
John

 

[Sy#1991]

Re: New Member - Raleigh NC

Welcome. I live in garner Clayton area also. If you ever need help or parts let me know.

 

[SYCLONE#1531]

Re: New Member - Raleigh NC

Welcome!!

 

[robertmee]

Re: New Member - Raleigh NC

Welcome. I live in garner Clayton area also. If you ever need help or parts let me know.

Awesome...likewise if you need access to a lift let me know.

I could use an extra set of eyes/ears/knowledge to figure out my tune issue.

 

[Sy#1991]

Re: New Member - Raleigh NC

Awesome...likewise if you need access to a lift let me know.

I could use an extra set of eyes/ears/knowledge to figure out my tune issue.

That for the lift offer but I work at a 10 bay shop with 9 lifts. Do you have a lift at home or are you a tech for a living? There are some guys on here that are great with tuning just tell them your setup and they can get a tune very close. I'm off all weekends and always like checking out other trucks

 

[robertmee]

Re: New Member - Raleigh NC

That for the lift offer but I work at a 10 bay shop with 9 lifts. Do you have a lift at home or are you a tech for a living? There are some guys on here that are great with tuning just tell them your setup and they can get a tune very close. I'm off all weekends and always like checking out other trucks

Two post lift at home....no I'm not a tech...an amateur wrencher at best and always learning. I'm usually around most weekends especially in the summer lounging by the pool. Feel free to drop by. There seems to be several sy/Ty owners in my area so when the weather warms I'll see about hosting a mini meet of sorts. Maybe a weekend cookout.

 

[SloGN]

Re: New Member - Raleigh NC

Welcome to the AWD darkside!!!

I'm located in Randleman ..

I own a GN and a SY

 

[robertmee]

Re: New Member - Raleigh NC

Welcome to the AWD darkside!!!

I'm located in Randleman ..

I own a GN and a SY

Yep, we've met at Richards many years ago. Keith has my GN in charlotte building a new engine after the crank snapped in two.

 

[Chevymec]

Re: New Member - Raleigh NC

Welcome!! I know you joined HPJ also.

 

[robertmee]

Re: New Member - Raleigh NC

Welcome!! I know you joined HPJ also.

Stalker

 

[carbon_SHO]

Re: New Member - Raleigh NC

Come to the April 16th NC SHO/ SouthEast GM Turbo 6 Meet!

 

[Chevymec]

Re: New Member - Raleigh NC

Stalker

I was here first!! :rotf:

 

[robertmee]

Re: New Member - Raleigh NC

Come to the April 16th NC SHO/ SouthEast GM Turbo 6 Meet!

Would like to but kid has soccer tournament that day. Will have to see if the schedule permits before or after. 12-4 is pretty much the normal time for soccer play.