Sparkz#0535
Member
hello all!
I recently acquired Sy #0535 a few weeks ago. I do not want a stall in this truck but I would like the truck to trap 105-106. I could put a 20g on it but I still want it to rip out of the hole.
Stock heads and cam
rebuilt with stout bottom end
stock A2W IC with upgraded pump
rebuilt 17c or possible 20g .... still needs to be able to 60ft hard
stock fuel pump or 255lph ?
some kind of chip or possibly code59 or moates ostrich? needed for mild bolt ons? what chip?
built 700r4 stock converter
no cat and 3" exhaust ....will this cause boost creep? do I need to add a external gate on the crossover pipe ? I would like a big down pipe but I cant find them.
around 21psi with an alky setup...will that get me to 105mph trap?
Here is the truck after a clay bar rub down and a quick wax job .....truck has just under 62K miles on it
any thoughts on my plan or any advice is greatly appreciated!
What would you do to it?
Thanks
I recently acquired Sy #0535 a few weeks ago. I do not want a stall in this truck but I would like the truck to trap 105-106. I could put a 20g on it but I still want it to rip out of the hole.
Stock heads and cam
rebuilt with stout bottom end
stock A2W IC with upgraded pump
rebuilt 17c or possible 20g .... still needs to be able to 60ft hard
stock fuel pump or 255lph ?
some kind of chip or possibly code59 or moates ostrich? needed for mild bolt ons? what chip?
built 700r4 stock converter
no cat and 3" exhaust ....will this cause boost creep? do I need to add a external gate on the crossover pipe ? I would like a big down pipe but I cant find them.
around 21psi with an alky setup...will that get me to 105mph trap?
Here is the truck after a clay bar rub down and a quick wax job .....truck has just under 62K miles on it
any thoughts on my plan or any advice is greatly appreciated!
What would you do to it?
Thanks
Last edited:
