Recent content by dstevens

Re: torque converter unlocking while driving? well i did all the above, and the jumper on the aldl locks up the converter in 2,3,and o.d. and it stays locked up, so if its a tuning problem where do i start ? I have the brian green chip the one with the dial the turns from 0-9 and the a-f. I...

Re: best t.c. stall to use how much for the converter for sale ?

Im in need of the buttons that slide in the rails for a syclone, I need like 17 of them and gmc does not sell them, pep boys has no idea what is going on and i really dont know where else to go, any of you guys have a source for these, I have had the truck about 2 months and was hoping to put on...

Re: torque converter unlocking while driving? Nope, dont understand what you just said or how to do this when you mentioned the brake,ecm and paperclip thing to do, I would sure check all of these if you could explain it further. Thanks i will call anybody for advise also if you want to send me...

For some reason this thing is unlocking while im diving and then re-engaging, not all the time but its getting more and more regular, tranny is new and has a 2400 stall, I was told it was the sylinoid and had it replaced, well it stopped and then its back again. sorry if this is a repost but i...

Re: new syclone owner engine questions i have a turbo that was taken off the truck at 75000 miles, it is supose to be a good turbo. I moved the waste gate actuater rod and it was stiff but moved smoothly. I did the same to the one that is on the truck now and it sqeaked when i moved it. So i...

Re: new syclone owner engine questions is there a write up or post on how to check the msd, and how to port the stock waste gate and to check it ?

I just bought a syclone from a guy and it has quite a bit of mods, but retains the stock turbo with a gutted cat and staight bulet type muffler for an exhaust, the turbo , engin and tranny is 5000 miles old and all is cool but the over boost thing, It will sometimes hit 23 lbs of boost and then...