Recent content by FstAzzBlzr

Believe it or not, a friend of mine was changing the intake gasket on his full size chevy truck and to our surprise found a screw driver in the lifter valley. Shannon

So whenever you hit WOT the INT will go to 128 and stay there as long as you hold it at WOT? Sorry for all the questions. Shannon

Should they go up or down in PE mode?

I used Olivers in my rebuild. Unless you find a sell on them somewhere, be ready to pay $1000 for them. But they are really nice rods. I couldn't find any balancing marks after getting them back from the machine shop. The guy said they were all matched to start with. I have a friend that runs...

In the Snap-on Scanner I was using, It has a table that shows either open loop or closed loop. When it is first cranked up it is in open loop. The when the truck warms up it goes into closed loop. The truck had a bad, bad breaking up problem over about 10 psi. I checked the FP and the fuel pump...

Guys, Does anyone have any ideas on why my Sy will not go into open loop at WOT? It has the stock chip. According to scanner TPS is at 100% at WOT. Thanks Shannon <font size=-1>[ This Message was edited by: FstAzzBlzr on 2001-12-11 21:59 ]</font>

Just my opinion, I would try to stay away from the "bling bling" look. Know what I be sayin, yo! :grin: I dont really care for the chrome rims, but they do look good. It is a big improvement over the stock rims. Word up, Shannon <font size=-1>[ This Message was edited by: FstAzzBlzr on...

If they told you they can't pull the code unless the light is on, they are B.S. you. I am not sure if there is a how to on here anywhere. Maybe someone could send you pics of it or know where the how to is. I would just lengthen the wastegate rod by turning the rod maybe at half turn increments...

If it does that and the check engine light comes on then more than likely it is hitting overboost. Pull the codes from it and see. If it is overboost you need to loosen up on the wastegate. Shannon

I beleive that these are diacom files. Guys correct me if I am wrong but I dont think Datamaster existed back then. Shannon

Couldn't have said it better myself.:grin:

I think those diacom files used to be on Sean Morris' website. That was when him and Dabney were in the ty together. I don't remember the race but I think the top speed was either 156 or 157. Maybe Sean (Tyndago) could shed more light on it. Shannon