Search results

Re: No Start So all you did was put a new connector on it? I have a new mini starter less than 2 months old driven the truck less than 10 times and now have the same problem you do. No click or turn over but full electrical. Guess i'll have to jack the #@$ up tommorow and mess around with the...

Re: Cold start issue The EGR is blocked off and it's not doing it anymore the revving past 1.5k sputtering part, it still runs like sh!t after 3-4 minutes cold idle tho. I dont have a wideband and my narrow band intrestingly enough is stuck at 15.5ish even without the engine on. To top it all...

Truck has had problems with cold starts for awhile now, typically what happens is 3 minutes or so after u start it the truck really stumbles for idle and sometimes dies. Today i revved it in park to warm it up faster and if i tried to go past 1.5k it would buck pop and stumble as it got warmer...

Put in a new start awhile back added a fuse to the battery and drove it for awhile let it sit for 3 weeks now as soon as i try to start it, tries to crank a few times then the jumperpack gets low and i start hearing rapid clicks and no turning over. Any idea what else might be causing the...

Re: Race motor coming together Who needs a rad just run pure meth.

Re: Got a response from Melling Oil Pump break... U should print that page up and send it back to them wrapped around a broken oil pump.

Re: Got a response from Melling Oil Pump break... It's nice that they now make the m-select but i dont want to support a shady company like this do we have any other optoins?

Re: A Syclone in Asia? Were the owners in the military or actual japanese?

Re: Gauging interest: Custom Turbo Manifolds I'd pay abit more for 321ss but doesn't rpm's work better with aftermarket heads with different angle than the stockers?

Does anyone know of a company that makes sfi approved 10-15 gallon tanks for methonal use with the pickups on the bottom? I'm looking for more of the plastic type cell vs a aluminum one because meth eats away at aluminum. Either that or a small 1 gal sfi approved surge tank with bottom pickups...

Re: Frame support? Meaning that it uses stock location? I'm confused.

Saw a thread awhile back about getting rid of the brace that holds the spare tire in place and putting a fuel cell in there with additional frame bracing? Where did it go?

Re: 350z with 250shot NOS VS Deanzsyclone W VIDEO If yer spraying that much nos wouldn't it cost him about a 100 bux a run anyways? :P

Re: Saw some cool stuff at SEMA Hmm where are the cfm ratings for those new flexalite fans?

Re: Making a meth fuel cell Diff btwn 5051 and 5052? The guys at RCI seem to think that 5051 will be fine for methonal use. They say that guys run aluminum tanks all the time, and have never had any problems just dont use the foam as it eats away at it. However i'd like to play it safe. My main...

Re: Making a meth fuel cell Diff btwn 5051 and 5052? The turn on is not really an issue because the line is already charged and filled tho if you store if over long periods the line could dry up. However you could of course mount a purge or manually purge it after long storage.

Re: Making a meth fuel cell Diff btwn 5051 and 5052? Well that just really puts a damper on things, I'm trying to make a custom tank for max storage capacity as I want to do some run what you brung events. And if I just happen to bring a 10-15 gal tank it would surely cover any road race and...

I've noticed rci makes their cells out of 5051 but my local supplier only carries 5052 can anyone tell me the difference between the two alloys?

Re: My truck comes off the ground when I launch.

Re: Raced a VR4 I went out last night and got a whopper.