Search results

Mine has been sitting on the floor for months while i switch chips for tuning. Now I cant figure out or remember how it goes back in?

So like it says, I got a few bucks to throw at the syclone. It presently has no rear suspension mods so I'd like to start there to improve 60ft times. Lowered w 2" blocks, stock leafsprings. I might add the belltech dropleafs since i have them. What would be better caltracs or battle bars? Is a...

I replaced the fuse so far. I searched on hear and found plenty on phantom wipers threads but not much on my issue. Is this a common related problem that someone knows the reason? Where should I start?

I'm maxed out at the point of tuning with the stock o2, time to buy a wideband. I would like to hear of some recommendations from you guys. I need a wideband that i can use/ wire into my ecm so it will work with Datamaster. Doesnt have to be anything fancy but good enough to be accurate. Any...

I really liked the way syclones looked without the decals so i began to remove mine off the door cladding and the shape of the decal and its sticker glue are left behind. I tried 3m adhesive remover, wd-40, and laquer thinner. Nothing. I cant get it off? Has anyone tried this or know what works...

I have 4 18x9.5 magnesium c5 wheels and from what i find they are supposed to be a 65mm offset. Now i also read that all the other 9.5 wide vette wheels are around 54-56mm offset. Why are mine different if they came off the same model vette?, My real confusion is what size adapter I will need...

1. I ran water from the block drain to the watercooled centersection. out of centersection to the intake manifold under the thermostat. I think this was how the stock setup was. Is this correct? 2. Does anyone get a small whine from their BB turbo just under and just into boost? I fixed an...

Started out not wanting to go into overdrive when driving normal. If i reved it up it would go into od. This seemed to happen more often when it was hot or after a short run with 50% throttle. I have never floored this thing or put it past like 10lbs of boost since Ive been tuning it slowly...

I cant find this noise :rant: I think its my fuel lines hitting the tranny or under the truck. I also have a big knock count and its pulling alot of timing. I figure its false knock from this noise but i cant get rid of it. The DM files show everything runs and looks great except for this...

How well do 18" nitto 555r drag radials work over reg street tires? 60ft traction I have 18x9.5 magnesium vette wheels to put tires on and i'd really like to put some drag radials on the back. Are they worth the xtra money? How much better do they hook over a reg nitto street tire? Does anyone...

Where can i find a Volvo fan? used, new?

At idle the truck will usually hit 200-210. I have a flexalite elec 2800 cfm fan and a 160 t-stat. As long as im moving on the highway the truck will stay between 175-185. Stop and go driving is between 185-200. Through a search i found an issue i might have, since i re-routed my heater hose to...

I have a ultimate chip that was in the truck. When i pull it out there is another chip looking thing plugged into the ultimate chip with a blue top on it, What is this? does it need to be specific? The truck runs this way. When i put my new chip in the ecm along with that same chip looking thing...

I downloaded what seemed to be the right driver for the cable but nothing works. I was wondering if the datamaster cd i got with the supossed drivers on it for the aldl cable (usb) has specific windows drivers or will they work on xp, 98 etc...?? I have 98

with the tail gate down. If possible without the license plate in the pic. thanks, gixxer425@yahoo.com

I need to have my tranny cooler fan come on where i want it rather then getting the specific preset temp activation thermostat. What are you guys using? I was looking for one the has a sensor that is threaded over the probe type unless the probes are accurate enough? are they?

Ive tried searching here and couldnt find anything.I have an atr dwnpipe and a 38mm tial external wastegate and i need some pics or a vac line diagram of how the vac lines are run/routed for this setup. I also will be plumbing in a greddy elec boost controller if this makes a difference. Thanx

what kind of bolt holds th tv cable to the tranny? lost mine. Its some small bot, prob 10 mm head on it. :(

Grundy Sucks!! My truck is in really good shape. So I sent them pics of the truck as they asked of the side, engine bay, bed etc.. They declined me because of some scratches in the bed! The truck never hauled anything and it is not rated for it from the factory i told them. It has 40K on it. It...

or if its the same as a reg 4.3 v6 motor? autoparts stores never specify sy/ty as usual