Search results

Any tips are apreciated.

I saw a Black Black on Sunday at about 3:30pm crossing of Hempstead turnpike heading south down New Bridge rd. There was a girl driving it and it had Jersey plates and rims.

If we tow a Ty with all 4 wheels on the ground will it screw up the differential or transfer case? Should we disconect the front propshaft? I am getting mixed reviews about this. Also it will only be for a very short time, maybe 10 to 15 miles.

Some kid at work emailed this to me, what game is this? http://www.midtownmotors.co.uk/vehicles/g/gmc_syty/gmcsyty.php

I did a search and didnt come up with much. how difficult is this install? I have to put in new ones and brakes before this guy will inspect my truck. I also need to be in Pittsburgh on Friday so this has to be done. Can anyone give me a lay out of what has to be done? Thanks

I was disgusted! I ran a 14.6 at 91mph with a 2.1 60'. I have the run on tape and will host it up tonight and post it. THe truck is all stock except for a Shurflo. I only got one run as I was there really to help Mike get his SS in the 9s. But still I thought 14 flats or high 13s. My 60' suck...

If the weather allows I will be going to E-Town. My buddy ran his 99SS at Atco on Saturday, rolled it off the trailer and busted out a 10.1 at 134mph with a 200 shot spinning through the 60' and going sidways in second. he is looking to hit a 9.80 on Wednesday after some suspension tuning. I...

I saw you heading East right infront of Home Depot in East Meadow.

Anyone know the bolt size for the tank straps? I gotta change out my fuel pump and I will most likley break every bolt trying to get them off. I just wanna have some replacments ready.

Its not leaking from the seam where the cover meets the rear. Its leaking from the bottom most bolt holding the cover on. I can run my hand along the bottom of the rear and its clean yet I see a drop in the driveway. Do I have to rip this think apart and get a new gasket and re-doit? Or is there...

The plug to fill is located on the side of the rear correct?

Why would I throw a lean code after I gunked my engine?

I will be out there watching, i will have the Ty. Anyone see the two big bald dudes say whats up!

We took both the rear 18" Z06 rims off my buddy's SS and mounted on my Ty for a photo op. They are 18x10 with 295/35s. There fit fine on the rear but looked real close to rubbing up front. I didnt drive with them at all so i dont know how bad they really would be. As you can see the front center...

I forgot to take notice, does the bottom outlet of the Exchanger go to the upper intake of the IC? Also just to clear my head a bit. the pump pumps out of the exchanger and into the IC correct?

My buddy saw a Green/Grey Thrsday night on North Jerusalem. Anyone here?

We have learned that the gasket for the TB to Intake is Felpro PN 60826 and is the same one ran on a 90 Corvette 350. According to the computer of the parts store we run a pn 60903 and it was wrong.

I just did a tuneup, plugs, wires, cap, rotor, checked vacuum system for leaks and changed the IAC and installed a pitbull chip. We ran a DM and the truck is running lean, the O2 is reading 777 to low 800s and i am gettin 10 degrees KR, where do I go from here. I can email the DM to anyone if...

I ran a can of top end cleaner, man did that smoke! Then we did an oil change and tune up, another bitch! Anyway as of today the idle is higher, sitting in park its a little of 1grand and I also keep throwing a check engine light, is this because some of the topend cleaner is still in the motor...

Check it out http://www.sportmachines.com/media/videos3.html bottom left, "winter wonderland"