Search results

Where are you located? Later, Malik

hope not :( I'll find out for sure tommorrow when I put the spring in.

Its leaking right at the conection to the tranny adapter. My question is: Is there a gasket in that union or is it one of those permetex deals? later, malik

Driving around yesterday around 40mph when the motor starts to stutter heavily like it lost 2 cyclinders {I'm thinking blown headgasket} then it makes this noise like there a little monkey in the engine playing slots{ching ching clankedy clank}. So i shut it down. Did a copression check and...

Powder coated mine...crome with a clear coat.

I've heard alot of pumps that are larger than the Johnson pump you have start screaming after mabey 3 years min. from the bearing going out but never heard one do that from that start. It's deffentely not normal. Later, Malik

Thanks for your input guys, I got some bigger problems to deal with now> driving around today at about 35-40mph and the truck starts to stutter heavily and begins make a heaving pinking sound....like someone threw some nickels in 1 or more of the cyclinders. VERY VERY bad sound....this is...

I'd like to get one too. :lol: mods>built bottom end/ported vortecs/ported intakes/412/20G/deltagate/50lbers/ PM me. Thanks, Malik

My new motor is cutting out when you snap the throttle. It cuts out and makes kind of a pop sound from the passenger side of the motor. Almost the same as a fuel cut off from passing the rev limiter[engine shuts down for a second} but with a light pop sound?? It hesatates and cuts out with a...

Just looked at my truck and ......the bent one that you're talking about goes where the #4 is on the diagram.....but it bolts to the next bolt toward the front on the exhaust manifold......mine has the bent portion on the exhaust. hope this helps, >Malik

Is this just a fad......or is there some truth behind it?? >Malik

I was totally wrong.....it wasn't even the wastgate.....it was a slight misfire! I put in some Autolite plugs in today and decied to check the resistance of my Tr5's ...one of the plugs was off the charts.....they only had 200 miles on'em. I'm doing some testing with plugs right now and...

Ok....cool..so an external does open and close real fast to control boost . I thought it would blowoff or bleed off like a blowoff valve. The exhaust side of my external is open ....... and it sounds like exhaust puffing out in a controled way.....thanks! Malik

Can you hear your external wastgate??? I'm hearing some noises under boost that sounds like my external wastgate opening and closing real fast{puffing sound}....i don't a have dump pipe and its mounted on the crossover. Does this sound normal?? Is that how the external works....opens and closes...

Yeah I like it too...never heard my truck with open exhaust though.....I have to try that. Don't worry i have a external. :D

Is your DP heat wraped??...if it is you'll deffinetly see higher temps when mine wasn't wraped ........raging around town and 100 on the highway it would'nt go above 1250 After I wraped it I've seen temps up to 1380 with my SPA Guage mounted in the same location as yours. Your fine...

I too am having the ignition woes :banghead: and thought about the MSD but gonna get the remaned one with MSD wires and Autolite Racing plugs :rock: I'll let you know how it works out.... Right know the truck starts to stutter under load after its warmed up....I'm thinking its a wire...

Its a guess....

Sweet....thanks

Gatch ya ....... I'd just ad another 10 cfm or soo on both of those numbers and that should be about right.