Search results

Now we just need someone to 3D print new Rear Defrost and Rear Wiper switches that don't turn white haha. And while we're at it a new top "plate" for the center console with functional depth cup holders.

The only thing those calipers upgraded was the APPEARANCE of your brakes. If you want to see an upgrade in braking performance take those calipers off and put the stock brakes back on haha. Do some recon on those REAR CTS-v calipers and you'll find they're in fact REAR calipers for a reason...

I like the JSM kit for the most part... For me, i ran into some install issues where I had to cut/grind a few more spots of the frame for clearance that weren't called out in the directions... which was a bit of a pain in the ass because there was no way of knowing this until i had everything...

Whattya got??? PM me.

That thing looks as queer as a football bat! hahaha one of my favorite Jimmy lines... hahahaha. Good to see you back man! I missed your insults!

Good work, Keith! Glad to have the board back up and running! Thanks for keeping this going all these years!

What gas are you using? 5* at WOT on 91oct is not that bad. I haven't seen a ton of these trucks in my tenure, but I don't think I've seen or heard of any truck that didn't have some degree of knock on pump gas. I'd still get 1-2* on 101oct in my old syclone.

Just came across this one new for 2019! You'd still have to hack up a bezel to get it in there, but definitely a much better option than that old shallow Alpine deck from a few years back and the Parrot never really struck me as anything all that great. This at least looks like a pretty decent...

Hahaha ya know... If you took out the part with the cokes costing $50 and your card getting declined... It's probably not too far off from what would really happen. Most "celebs" are dicks, and a lot of the ones who you think would resemble the characters they play in movies are really just...

Hahaha never! That thing is a travesty! Even if they had put the turbo ATS-v motor in there and made it AWD, it's still way too big and clunky. I love how small our trucks are... but then again, I'm not over 6ft tall and pushing 280lbs or more... So getting in and out of my Ty isn't a struggle...

I got under my truck and looked at the muffler and couldn't find any markings or anything that would indicate brand/model. Thanks for the info! Glad I wasn't the only one who noticed the drone! Makes me feel less crazy and nitpicky haha. Sell it to me!!! haha. Yeah when I got the one for...

Ahhh nevermind... Talked to the dudes at GN1 Performance, and they're pretty much the only guys making an ATR Pitbull replica muffler that doesn't drone. Guess that's as close as we'll get to the OG. I have plenty of other probs to worry about before the muffler, but I might pick one up and be...

haha I wasn't too bad to him. He just caught me at the wrong time and came up all cheery and said "oh I remember these! These things are badass!" and I just gave him a death glare and said all snarky "That's right! Baddest trucks ever made until you own one, and the piece of shit is...

ok... well it's been a lil while and figured I'd post an update. So reached out to Eric at TurboTweak and he tweaked some fuel settings and sent me another eprom. I popped that in, and the hesitation is gone. Yay! However, the AFR is still dipping down to 10 when I blip the gas at idle, and...

Well just like the thread title says... Does anyone know who they sourced for the muffler? I had one on my Syclone and loved how quiet it was. I have the RPM 3" catback on my Typhoon now and I think Mike used a Gibson or Borla type muffler? (I could be wrong). It's got a decent low rumble at...

HAHAHA I thought the same thing! Why wouldn't they put the twin turbo V6 from the ATS-V in it? I'm so done with GM... this company completely shit the bed after the buyout and with the exception of the Corvette and the V-series caddys, there's yet to be any vehicle under the GM brand to come...

I pulled the throttle body out cleaned all of it, and replaced all the gaskets. It's always had a slight hiss like a pin hole in a bike tube, my Syclone had the same thing. My vacuum level is 18-19 at idle, which I figured is acceptable. I adjusted the throttle stop screw and got the TPS...

I have a datamaster file I posted but my apparently the link I posted from my WD mycloud, doesn't work to download it. I got the stethoscope out today, and found the noise. It's coming from the injectors although I can't really tell exactly which one, cause it sounds like it's coming from all...

The frustration continues!!! The distributor I ordered from Summit showed up and the one they sent me was for a 2nd Gen S10, which was huge. So I had to send that back. I decided to order a new set of wires first, just to rule those out for sure before I try reordering another distributor...

ok cool! that's all i needed to know! Managed to find the whole light assembly new on ebay for $10! SCORE! I'm pretty sure it's the switch that failed since none of the wiring looks cut or spliced in any way, and the light turns on when the doors open. For the integrity of the thread and...