Search results

The following 2 people are wanted for vastly improving the handling of my truck. The difference they made rate at the same level as the rear sway bar I installed when I purchased the truck at the recommendation of Mike Lee at RPM. These 2 sold me on the go-kart handling. I purchased the parts a...

Well I got around to changing my steering box out as I had to replace both the pitman arm and the idler arm. Here goes my :rant: X 3, After it (meaning the pitman arm only) soak in penetrating oil all night. My pitman arm puller broke trying to get it off, I broke a 2 jaw 3ton puller and right...

After doing a search and reading this post. http://www.syty.net/forums/showthread.php?t=34226&highlight=Steering+Box Is it possible to remove the box without removing the charge air cooler? Can the steering shaft come out with the box? TIA

Looking to see if anyone is interested in this. I have my radiator man looking into a larger lower intercooler that will bolt in useing the stock mounting with really minor work, mainly trimming the housing some. If you are interested post here and I will look at a group purchase price from him...

The old 3 bar map sensor GM Part # 16040749 was a 3 wire connection. The new 3 bar map sensor GM Part # 12223861 is a 5 wire connection that requires a new connector Part # 15305891 to be installed with the new map sensor. The question is which of the 5 wires do you use or is there a better...

GM is coming out with a new 6L90 transmission. http://www.gm-trucks.com/home/content/view/285/49/ I wonder if it will work for us? Double Overdrive sound nice.:tup:

As each State is different with smog testing and some states have different testing by counties, can we have people list what is used for testing where they live? Here in Riverside County, CA they use a dyno that you drive on for a 2 part testing procedure. If you have AWD, then the testing...

Look all stock, still had the factory exhaust on it. HWY 38 in Mentone. Looks like it needs some TLC. I follow him to his work in Redlands as he wouldn't stop. I will try and meet up with him next week.

Is this engine from anyone here? What happen to the 10,000 mile Typhoon? http://racingjunk.com/post/775304/Syclone-Typhoon-Turbo-Motor.html

I found out today that the guy who made the AFPR for Kenny/Bell still has the program to make them if there is a need. He has the parts to overhaul them as well. K/B is no longer doing anything with the Sy/Ty so we can go direct if there is enough interest.

Well we had Christmas early this year, yesterday, as both my boys will be missing Dec 25 as active duty calls. So my oldest son said after I open up the other gifts that he had something to give me that I didn't have. It was a 2 part gift part 1 was the movie Cars and part two was a 100%...

Can someone get me a measurement on the diameter of the front sway bar. TIA

Outside of the VORTEC HEAD CASTING NUMBERS and the holy grail of 4.3 info!! . Does anyone know if the 2001 and later heads flow more? Did they continue to make inprovements to the heads and valvetrain? Is there a complete updated version of the holy grail of 4.3 info that has this information...

I went thru the 2 pages of Aluminum Driveshaft and Propshaft posting. Here my Questions. Who is making them still and what is the current pricing? Any problem with them? TIA:tup:

Does anyone know if the gage panel that would fit in the cup holders is being made by anyone now? KB made the 1st one years ago, but it not available anymore. I'm looking for one for 4 gages and would like room to mount a Ultimate Chip control box. I may have to make my own, but I'm not that...

Does anyone have the instructions that will give me the setting information? EX: T-1= ?, T-2 = ?, T-3=?, ETC. I try searching and the link to the chip site. TIA

Is this the part # for the 1996 454 starter that people are changing to? ACDelco Part # 336-1910 TIA.

Been there,Done that with the search button. I know this depend alot on market pricing and all that stuff and it's not like there were 900 of them made. But does anyone know the current going rate for a Sonoma GT? TIA.

Sorry for a long post, but here it goes. My sweetheart tells me about this lady husband who died and has all this stuff in her garage that needs to be clean out. She wanted to know if I could look at it and tell if anything was worth holding on to as her sons were a couple of deadbeats and...

Has anyone change to a late model water pump(ie 1999 or newer to change over to the new style fan clutch? I have a spare fan from the newer years (It has 11 blades vs our 5 blades) that I was going to put on, but I might change out the whole works. Any Thoughts on this?