Search results

Re: Anyone Elses TB To IC Boot Pop Off At WOT? Yes stock turbo, and no I need the small L shaped boot that goes on the boost solenoid to a vacc line. Okay thanks I'll check out those t-type clamps, 4 inch right?

Re: Anyone Elses TB To IC Boot Pop Off At WOT? Don't need a new piece there just yet, the one I need is on the turbo, a little vac L. I'm thinking that being off is causing overboost, which is causing the TB to pop off the IC.

Re: Anyone Elses TB To IC Boot Pop Off At WOT? How do you find the parts catalog on sportmachines?

Re: Anyone Elses TB To IC Boot Pop Off At WOT? Okay yes that's what I'm referring to. What does that solenoid do? Would that vac like being gone affect performance?

Re: Anyone Elses TB To IC Boot Pop Off At WOT? I'm afraid I'm gonna ruin the clamp. I think that's what it needs is a new clamp. Another thing, there's a sensor or solenoid on the turbo with L shaped vacuum lines coming off of it, well it looks as if one of those L's broke in half. But where...

Am I the only this happens to? It is VERY annoying grrr!!!

Re: A/C problems Had my A/C looked at the other day, and my compressor is locking up. =\

Re: Brake Light, Turn Signal, Rear Light Problem.. Fixed this issue. I was looking around underneath the truck, we'll say inside the rear bumper. I started pulling off the wire looms an found the problem. There was a black wire which was a ground pulled out of what or wherever it connected to...

Re: No start after Ign Coil and Rotor Button change!! Hey guys I got her!!! The tab on the inside the old rotor button had broken into the shaft. So that wouldn't let it get seated properly. I put dielectric grease on the bottom of the ignition module, and on the two terminals that connect to...

Re: No start after Ign Coil and Rotor Button change!! Here's how desperate I am, my phone number is 740-645-6096. I can send pics that way. I have the cap off, just put the new ignition module back on with grease, checked the three pigtails that go to it. The small two wire pigtail from in...

Re: No start after Ign Coil and Rotor Button change!! The reason I changed it was for a tune up. From what I've read they can cause long start up times, inconsistent shift point and lack of power. I mean it was a tune up part from what I understand so I figured a new one wouldn't hurt. I was...

Re: No start after Ign Coil and Rotor Button change!! Could the pickup coil have went bad from it being the only stock part in the ignition.

Re: No start after Ign Coil and Rotor Button change!! Okay thanks guys gonna try to get a ride to the truck and try everything mentioned. Hopefully I get it, cross your fingers, mine are lol!!

Re: No start after Ign Coil and Rotor Button change!! Yes that's what I installed. I noticed the old one had grease but the new one didn't. Could that be why its doing this? My boss told me to look at the pickup coil connector, he said they get brittle and could warp, so it's plugged in but not...

Re: No start after Ign Coil and Rotor Button change!! Hey didn't turn the distributor, it's solid. When I was putting the button on, I wiggled it around to get it on and it turned a hair. I just got one from advance auto, its the coil that goes on the bottom of the distributor. I didn't use any...

Hey I replaced the ignition coil, along with the rotor button and now my truck won't start, it just pops when you roll it over. I know I turned the rotor when putting it on and I think it made it jump time or something. Other than idk everything is hooked so I'm lost and have nothing to drive...

Re: Brake Light, Turn Signal, Rear Light Problem.. Okay does anyone know where this ground is? Thanks for the replies!!

Hey guys, my Syclone is giving me some problems.. Okay here's what's going on, if I hit the brake my brake lights and turn signals don't work. If the headlights/marker lights are on the turn signals don't work, and the brake lights lights along with stop, and license pants lights don't work...

Re: Borla 3" Cat-Back with dual "Intercooled Tips" for SYCLONE --- used $290 + shippi Re: Borla 3" Cat-Back with dual "Intercooled Tips" for SYCLONE --- used $290 + shippi Ah my exhaust rotted off and this would be perfect, only problem is the nearest greyhound station is about 3 1/2 hours away.

Re: Selling my Firehawk already Cheers to a fellow hawk owner! I have 02 #190 M6 T-top, and absolutely love it!!