9 sec Bowtie build

gt67sy

gt67sy

Member
Re: 9 sec Bowtie build

well the last engine part final got here with some help from Jaime Hacking.

20130328_232647_zpseaa159a9.jpg



Bryant Racing Billet Crank these are about a 4-6 month wait time right now

20130328_233018_zps7e5567b0.jpg


20130328_233026_zps99d76a04.jpg


so motor is finally been dropped to be assembled. Should see the 4 link sometime in the next week or two and we will be moving right along
 
gt67sy

gt67sy

Member
Re: 9 sec Bowtie build

Well as some may know I put my Innovative 88 up for sale, after talking to Harry Anderson and Alex (qbkiller) we determined it was out dated technology and was going to be a choke point in my build. So Alex hooked me up with a Bullseye Power billet 80mm. This turbo has a billet 80mm compressor wheel and 87mm exhaust wheel, I went with a 1.00 t6 ar housing and this thing should be able to put me deep in the 9's and still spool good on the steert as this is where the truck will live 95% of the time. The block and all it's parts where dropped off in New Hampshire sat at Golen Race Engines to be finshed and assembled shouldhave it back in a few weeks


20130417_221432_zpsd5e985b0.jpg


20130417_221412_zpsa3bcfc6c.jpg


20130417_221346_zps24c9ecbf.jpg


20130417_111714_zps6c67fdc3.jpg
 
TYTILIDIE

TYTILIDIE

METH HEAD
Re: 9 sec Bowtie build

Nice! Is the Bat Mo Wheel available in the 80mm? I am shooting for 10's this year up here at 6k but the more I read about others builds and accomplishments I don't think my little 76mm is going to get me there. I look forward to hearing about your feedback on that turbo driving around on the street, I was looking that direction but found my 76 for CHEAP.
 
gt67sy

gt67sy

Member
Re: 9 sec Bowtie build

you should be able to go 10s on a 76. Gerber (windedv6) goes 10's in his ty with a 72 and alex with low 10s with a bullseye 66mm
 
It's just a six

It's just a six

Super Member
Re: 9 sec Bowtie build

TYTILIDIE said:
I look forward to hearing about your feedback on that turbo driving around on the street, I was looking that direction but found my 76 for CHEAP.
Click to expand...

A T6 turbo is huge, don't expect it to have great street manners.
With the correct combination of parts you should be able to make your goal.
Depending on what 76 MM turbo you have, some are not in the efficient range until after 30 psi of boost. So if you have an engine that wants 35 or so PSI, 10's should be there.

What size is your turbine wheel & A/R on the turbine housing?
 
gt67sy

gt67sy

Member
Re: 9 sec Bowtie build

you can make a t6 spool if you have the right matched set of wheels to help it spool
 
T-Bone

T-Bone

Active member
Re: 9 sec Bowtie build

Jimmy said:
I forgot more than you know.
Click to expand...


If your statement is remotely accurate, thank your "self promoted" drug addiction for that :tup:. Truth is, you are vain, my friend.

Back on topic...your cheap shots at Bill are unwarranted. Why not do something constructive with your time instead of personifying DaveP in his absence.
 
Jimmy

Jimmy

Banned
Re: 9 sec Bowtie build

T-Bone said:
If your statement is remotely accurate, thank your "self promoted" drug addiction for that :tup:. Truth is, you are vain, my friend.

Back on topic...your cheap shots at Bill are unwarranted. Why not do something constructive with your time instead of personifying DaveP in his absence.
Click to expand...

Do you even know what you are talking aboot?

Nope.

As usual.
 
Jimmy

Jimmy

Banned
Re: 9 sec Bowtie build

I'll lay it all out for you son.

This Bill guy is a gigantic ****** that ripped off my boy for like tree-fiddy many years ago.

Bill is a ******y ****ing ******.
 
gt67sy

gt67sy

Member
Re: 9 sec Bowtie build

jimmy thanks as always for spending time thinking about me. It's always nice to see you posting in my threads.
 
Jimmy

Jimmy

Banned
Re: 9 sec Bowtie build

gt67sy said:
jimmy thanks as always for spending time thinking about me. It's always nice to see you posting in my threads.
Click to expand...

It's always nice to know that you don't give a **** that you ripped somebody off from here,******. :fist:
 
T-Bone

T-Bone

Active member
Re: 9 sec Bowtie build

Jimmy said:
I'll lay it all out for you son.

This Bill guy is a gigantic ****** that ripped off my boy for like tree-fiddy many years ago.

Bill is a ******y ****ing ******.
Click to expand...


There's always 2 sides to every story (and then there is yours). Perhaps "your boy" can fight his own battle since what your are digging up occurred back in the dinosaur age :dunno:. Surely he is all grown up by now, eh?
 
qbnkiller

qbnkiller

Conflaguration Specialist
Re: 9 sec Bowtie build

I have bought and sold to Bill with zero issues. This thread is his, and you've said your peace Jimmy. Why not start your own BASH Bill thread?

Congrats on your progress Bill. Don't worry about getting that turbo to spool. Your heads and cam combination, along with trans, gearing, and converter are why that turbo will be fine.
 
It's just a six

It's just a six

Super Member
Re: 9 sec Bowtie build

qbnkiller said:
Don't worry about getting that turbo to spool. Your heads and cam combination, along with trans, gearing, and converter are why that turbo will be fine.
Click to expand...

This is correct, but what stall is it going to take to spool up quickly?
Just curious. Thx.
 
Jimmy

Jimmy

Banned
Re: 9 sec Bowtie build

T-Bone said:
There's always 2 sides to every story (and then there is yours). Perhaps "your boy" can fight his own battle since what your are digging up occurred back in the dinosaur age :dunno:. Surely he is all grown up by now, eh?
Click to expand...

Thank you for talking shit aboot something that you don't know shit about.

:tup:
 
You must log in or register to reply here.
Top