Shadow images
New member
LIke the title says no codes are present with both light on. Any ideas. I searched but no definitive suggestions.
Abs/Brake lights but no codes
- Thread starter Shadow images
- Start date
2500avalanche
Well-known member
Re: Abs/Brake lights but no codes
Not flashing any codes? DId you try the paperclip trick?
Not flashing any codes? DId you try the paperclip trick?
Shadow images
New member
Re: Abs/Brake lights but no codes
Yes. I also have had three different scanners on it
Yes. I also have had three different scanners on it
Shadow images
New member
Re: Abs/Brake lights but no codes
Ok my fault, got the ABS codes 61 and 38 from jumpering A and H. Any ideas?
Ok my fault, got the ABS codes 61 and 38 from jumpering A and H. Any ideas?
atkonkler
Is this your bush?
Re: Abs/Brake lights but no codes
There's a way to cycle the abs motor using the paper clip method. Ive had the light come on so I reset the abs and its been gone ever since. I think there is a write up somewhere here. I did a ton of reading on it and decided to reset the abs module/motor.
There's a way to cycle the abs motor using the paper clip method. Ive had the light come on so I reset the abs and its been gone ever since. I think there is a write up somewhere here. I did a ton of reading on it and decided to reset the abs module/motor.
bigmileage
Member
Re: Abs/Brake lights but no codes
I usually cycle the abs unit with the tech1 and change the fluid. Deleting the unit is ridiculous. Of the three units i've see "broken" they were easily fixed.
I've see more wheel speed sensors bad than units (1:5 ratio too)
I usually cycle the abs unit with the tech1 and change the fluid. Deleting the unit is ridiculous. Of the three units i've see "broken" they were easily fixed.
I've see more wheel speed sensors bad than units (1:5 ratio too)
RealFastV6
@jb_and_his_coffee
Re: Abs/Brake lights but no codes
Seriously.
This is my first thought everytime I see an ABS thread.
Seriously.
This is my first thought everytime I see an ABS thread.
Re: Abs/Brake lights but no codes
After repairing mine in the past I will be deleting mine this winter. Mostly because of the way its designed to function on our trucks. http://www.syty.net/forums/showpost.php?p=449234&postcount=28
After repairing mine in the past I will be deleting mine this winter. Mostly because of the way its designed to function on our trucks. http://www.syty.net/forums/showpost.php?p=449234&postcount=28
AUSyTyIN
Unbusted $#it box
Re: Abs/Brake lights but no codes
I didn't say remove it because it can't be fixed. I said it should be removed because the ABS on these truck is laughable at best.
I didn't say remove it because it can't be fixed. I said it should be removed because the ABS on these truck is laughable at best.
Shadow images
New member
Re: Abs/Brake lights but no codes
Was hoping for an easy fix for now so I would have to remove it this quickly. Oh well guess I'll put it on the to do list.
Was hoping for an easy fix for now so I would have to remove it this quickly. Oh well guess I'll put it on the to do list.
powercat6
Active member
Re: Abs/Brake lights but no codes
I've said it before and I'll say it again: GM agrees. Just look at '93 Typhoon #0001 in GM's Heritage Collection:
http://www.syty.net/forums/showpost.php?p=960967&postcount=17
I've said it before and I'll say it again: GM agrees. Just look at '93 Typhoon #0001 in GM's Heritage Collection:
http://www.syty.net/forums/showpost.php?p=960967&postcount=17
atkonkler
Is this your bush?
Re: Abs/Brake lights but no codes
Ditto, I'll be deleting mine soon enough. I have a kit to delete it but just haven't done it. It is true the abs system they put in these trucks was in its infancy and the tsb proves thus along with gm even seeing it as being a pile of poop.
Ditto, I'll be deleting mine soon enough. I have a kit to delete it but just haven't done it. It is true the abs system they put in these trucks was in its infancy and the tsb proves thus along with gm even seeing it as being a pile of poop.
Shadow images
New member
Re: Abs/Brake lights but no codes
Just as update for later searchers. I reset the system and have not yet had the light come back on. I will however be pulling the ABS out later this year so I don't have to deal with it.
Just as update for later searchers. I reset the system and have not yet had the light come back on. I will however be pulling the ABS out later this year so I don't have to deal with it.
turbo_tuna
New member
Re: Abs/Brake lights but no codes
How exactly do you pull the ABS codes as well as reset. I can't seem to find it anywhere.
How exactly do you pull the ABS codes as well as reset. I can't seem to find it anywhere.
turbo_tuna
New member
Re: Abs/Brake lights but no codes
What is the procedure to do this?
What is the procedure to do this?